Jump to content
wizard

Official List of UK FI zeds

Recommended Posts

Should probably edit #21 Owner ??? - 370z GT Edition Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on ark grip exhaust: 469bhp, 350 lb/ft

Share this post


Link to post
Share on other sites

1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD

2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine

3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine

4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine

5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine

6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley

7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine

10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs:

11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine

12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs

13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi...

14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft

15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k

16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar

17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted

18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley

19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs

20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque

21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft

22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq.

23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar

24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft.

25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft

Share this post


Link to post
Share on other sites

1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD

2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine

3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine

4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine

5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine

6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley

7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine

10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs:

11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine

12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs

13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi...

14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft

15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k

16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar

17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted

18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley

19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs

20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque

21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft

22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq.

23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar

24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft.

25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

Share this post


Link to post
Share on other sites

8. Keyser:NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

 

Got 2 now? Can't keep up with you :lol:

  • Like 1

Share this post


Link to post
Share on other sites

8. Keyser:NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

 

Got 2 now? Can't keep up with you :lol:

 

My Bad I saw this version -

 

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

 

 

Delete number 8 as it will never be back on the road it's been stripped - I just looked at the last page and saw my entry correctly listed as sold but not the new one in it - to lazy to read back :lol:

 

(O and I've lost 5 hp :lol: )

  • Like 1

Share this post


Link to post
Share on other sites

8. Keyser:NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

 

Got 2 now? Can't keep up with you :lol:

 

My Bad I saw this version -

 

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

 

 

Delete number 8 as it will never be back on the road it's been stripped - I just looked at the last page and saw my entry correctly listed as sold but not the new one in it - to lazy to read back :lol:

 

(O and I've lost 5 hp :lol: )

 

Also too lazy to get your torque figures since post number 8 :lol:

  • Like 1

Share this post


Link to post
Share on other sites

8. Keyser:NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

 

Got 2 now? Can't keep up with you :lol:

 

My Bad I saw this version -

 

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

 

 

Delete number 8 as it will never be back on the road it's been stripped - I just looked at the last page and saw my entry correctly listed as sold but not the new one in it - to lazy to read back :lol:

 

(O and I've lost 5 hp :lol: )

 

Also too lazy to get your torque figures since post number 8 :lol:

 

You can bog off an all - you don't even have an FI Zed :p

 

Edit: you can go and start your own list of LS3 V8 zeds then it will be a lits of you and ALL your mates :lol:

Edited by Keyser

Share this post


Link to post
Share on other sites

To be fair there's a lot of talk with folk looking at V8's these days.... don't worry all you lot do is blow your engines, strip them, or sell them. Not much of a success....

 

Still..... I am heavily curious to FI.... you can't get rid of me THAT easily!

Share this post


Link to post
Share on other sites

To be fair there's a lot of talk with folk looking at V8's these days.... don't worry all you lot do is blow your engines, strip them, or sell them. Not much of a success....

 

Still..... I am heavily curious to FI.... you can't get rid of me THAT easily!

 

No but we can try ;):lol:

 

FI it - everyone needs 750HP :lol:

  • Like 1

Share this post


Link to post
Share on other sites

To be fair there's a lot of talk with folk looking at V8's these days.... don't worry all you lot do is blow your engines, strip them, or sell them. Not much of a success....

 

Still..... I am heavily curious to FI.... you can't get rid of me THAT easily!

 

No but we can try ;):lol:

 

FI it - everyone needs 750HP :lol:

 

750hp nice😊

Edited by tony420z

Share this post


Link to post
Share on other sites

1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD

2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine

3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine

4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine

5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine

6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley

7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine

10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs:

11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine

12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs

13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi...

14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft

15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k

16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar

17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted

18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley

19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs

20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque

21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft

22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq.

23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar

24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft.

25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft

 

Edited by taybo

Share this post


Link to post
Share on other sites

1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD

2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine

3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine

4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine

5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine

6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley

7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine

10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs:

11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine

12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs

13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi...

14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft

15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k

16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar

17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted

18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley

19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs

20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque

21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft

22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq.

23: Zmanalex - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar

24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft.

25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft

28. Scobie140 - 350z DE Stock block, Vortech V3 3.12" pulley 405bhp @hubs 340lb/ft

Share this post


Link to post
Share on other sites

Okay, time for an update on # 23 above.

Since the installation of Syvecs S6+ and also bigger turbos and new HKS actuators, the numbers at present are circa 720bhp at the wheels and circa 680 lbs ft at 1.6 bar.

The 2 rotary switches provide 12 boost settings and 12 traction settings.

It is still a work in progress, however getting there slowly.

 

 

DSCF5335.JPG

  • Like 2

Share this post


Link to post
Share on other sites
10 hours ago, scobie140 said:

1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD

2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine

3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine

4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine

5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine

6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley

7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine

10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs:

11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine

12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs

13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi...

14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft

15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k

16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar

17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted

18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley

19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs

20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque

21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft

22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq.

23: ZMANALEX - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar  Syvecs S6+  720bhp at the hubs and 680 lbs ft. at 1.6 bar: Work in progress:

24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft.

25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft

28. Scobie140 - 350z DE Stock block, Vortech V3 3.12" pulley 405bhp @hubs 340lb/ft

 
 
 

 

Share this post


Link to post
Share on other sites

1. Wizard: 350z Vortech v3 3:13 pulley, DE bone stock motor, 13psi, UpRev, 450bhp / 400lb/ft @hubs, over 10k boosted miles - BLOWN - NOW NEEDING REBUILD

2. Sam McGoo: 350z Vortech V2 3:33 pulley,'54 DE stock engine, 9.14psi, UpRev 402 HP/336lb/ft @hubs 25k boosted on a 27k engine

3. 4Re Leather: 350z GTM S/CSmall pulley, '09 HR Stock Engine, 10.35psi, 464.5bhp/383.3lb/ft @hubs, 2k boosted on a 17k engine

4. Oskaben: SOLD: 350z Vortech v2 Supercharger, 5k boosted on 36k engine

5. Darren-B: SOLD: 350z Vortech V3 standard pulley, '54 DE stock engine, ??psi, UpRev, 429 HP/???lb/ft @hubs 7k boosted on a 68k engine. SOLD: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft 6k boosted when I sold it on a 8k engine

6. Kev T: 370z GTM Stage 1 SC, VQ37HR stock, 7.5psi, UpRev, 432bhp/ 367ft/lb @hubs torque with standard pulley

7. PlanetSurfer2: 350z GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @hubs, over 4k boosted miles so far

8. Keyser: SOLD: 350z Vortech v2, 3:12 pulley, fully forged 'DE engine, Haltech Platinum Pro ECU, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @hubs. 4k boosted miles. NEW: 370z GTM 1.5 SC 445 RWHP /??? Lb/ft

9. andy james: 9. andy james: 350z GTM S/C, small pulley, Fully forged and balanced HR motor, UpRev, 463 bhp/376lb/ft @hubs. 7k total boosted on engine

10. djtimo: 350z APS TT Garrett Kit, fully forged 'DE block, UpRev, 11 psi, 469bhp / 448 lb/ft @hubs:

11. jables: 350z SFR TT, DE stock engine, 7.2psi, UpRev, 404bhp / 380lb/ft @hubs, over 20k boosted on a 37k engine

12. OllyB: 350z GTM S/C, standard pulley, Abbey Motorsport forged engine, bc rods + Ross pistons, 9 psi, Uprev, 471bhp / 371 lb/ft @hubs

13. D12BHP: 350z Vortech V2 Si Trim 3.13 Pulley, fully forged engine.... @ 15psi...

14. GT4 Zed: SOLD: 350z Vortech V2 T trim 2.87 pulley and fluidampr 6.125 crank pulley. 15.9psi 424whp/ 370lbft

15. octet: SOLD: 350z Vortech V2 430rwhp and 360lb/ft torque. NEW: 370z 7AT GReddy Twin Turbo - 553BHP | 465lb/ft on stock engine and 1000bhp built auto gearbox, 8psi, boosted at 22k

16. evilscorp: 350z Vortech V3 Sci, 3.33 pulley, stock engine, boosted 20 miles, 0.1 in anger 428.2hp 370ftlb (flywheel) 358.6 real whp 0.6bar

17. A9H-RX: 350z APS TT KIT Fully Forged Cosworth Internals 'DE Block, 10psi, 502BHP / 455lb/ft @ fly, 20k+ boosted

18. TheChubbyNinja - 350z Vortech V3 SCi, VQ35DE stock, 10psi, UpRev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley

19. GMballistic: SOLD - 350Z GT Coupe, Vortech V3 Sci, VQ35DE stock, 3.12" pulley, UpRev tune, 436Bhp@ fly / 368 ft/lbs

20. Clarkie - 350z GT Coupe - Vortech V2, 3.12" Pulley - Uprev Tune - 413.5 @ the hub / 345 ft/lb torque

21. dajw - Stillen Supercharger (Vortech V3) 9lb pulley, test pipes on stock exhaust: 488bhp, 360 lb/ft

22. TT350 - Power Enterprise twin turbo, stock boost, TDI North decats, Scorpion Y pipe back, Motordyne plenum spacer 431.5bhp/360ib/ft tq.

23: ZMANALEX - 350Z Roadster DE Forge Built: Twin Turbo: To many parts to mention: 666.8bhp at hubs: 563.9 lb/ft. 1.3 bar  Syvecs S6+  720bhp at the hubs and 680 lbs ft. at 1.6 bar: Work in progress:

24. Vlad - 350Z DE, stock block, Vortech V3 with 3.12" pulley. Supporting mods. 422.6bhp@hubs and 335.6lb/ft.

25. P15UL T - 350z DE, stock block, vortech V2 with 3.12 pulley, supporting mods. 434.7bhp@hubs and 343.3lb/ft

26. Keyser - 370z GTM Stage 1.5 SC, VQ37HR stock, 7.0psi, UpRev, 440bhp@hubs and ???ft/lb torque (I'll dig the dyno out)

27. Taybo - 350z Revup - Stillen S/C 'tuner', VQ35DE stock, Uprev, 8psi, 370bhp and 350 lb/ft

28. Scobie140 - 350z DE Stock block, Vortech V3 3.12" pulley 405bhp @hubs 340lb/ft

 
 
 

Share this post


Link to post
Share on other sites
31 minutes ago, ZMANALEX said:

Okay, time for an update on # 23 above.

Since the installation of Syvecs S6+ and also bigger turbos and new HKS actuators, the numbers at present are circa 720bhp at the wheels and circa 680 lbs ft at 1.6 bar.

The 2 rotary switches provide 12 boost settings and 12 traction settings.

It is still a work in progress, however getting there slowly.

 

 

DSCF5335.JPG

Nice one Alex.

shame us HR owners can't get near those numbers.

Share this post


Link to post
Share on other sites
13 minutes ago, andy james said:

Nice one Alex.

shame us HR owners can't get near those numbers.

You can, with the AAM TT kit, as you have your engine forged already :) 

Share this post


Link to post
Share on other sites
1 minute ago, TT350 said:

S/C vastly outnumber T/TT. 

 

Why.

Probably more affordable, less running issues, easier to fit and so

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

350z-uk.com

370z-uk.com

×
×
  • Create New...