Jump to content

ZMANALEX

Members
  • Posts

    14,760
  • Joined

  • Last visited

Everything posted by ZMANALEX

  1. What Graham has said, impossible to give informed advice when you keep starting a new thread with all your ongoing issues. I think that I asked the question in one of your other threads if you had fitted the fly properly, can't remember seeing a reply. Best to get your threads merged and highlight the fix to each of your issues. Your vid smacks of fuel cut off as you are revving whilst stationery or could be the fly issue or sensor issue.
  2. Are the caliper pistons definitely free ? Did you have the pistons out as a ring of rust can form behind the piston ?
  3. Thanks mate. I'll check the o2 5 wire is used (I think that is correct) I thought it could be cam sensor. I'll check that tomorrow. If you think of anything else let me know. As per my last post: Crank Sensor and Flywheel And retrace your steps and check all connections.
  4. The JDM car usually have 4 wire narrow band sensors and the UK car has 5 wire wideband. You will require the latter if you have a UK car. So, if not something stupid, check all you connections and pay particular attention to the crank and cam sensors. Edit: Did you fit the fly in the correct position to the crank pin.
  5. What front O2 Lambda sensors did you use ?
  6. If you want to rebuild your box then simply just strip it and replace the parts that are causing the issue. There are to many parts that give issue and providing a rebuild kit to cover all eventualities would not be cost effective.
  7. So just to be clear, you have installed a JDM engine into your UK car ????
  8. As per my other post in your topic I think that you may have answered your own questions, so I would be looking at the sensors. Did it really take you from my recommendation on the 18th of last month to replace the crank sensor ?
  9. I think that you may have answered your own question, so I would be certainly looking at the sensors.
  10. I will have a pair of adjustable SPC front upper arms coming off my 350 end of the month. I will also have available a pair of rear adjustable SPC toe arms and a pair of rear adjustable SPC traction arms. Just ping me over a PM if I can help further. Alex.
  11. More likely a toe in issue instead of a positive camber one. Any mods to suspension. if not, check for wear on bushings and ball joints and get a decent 4 wheel alignment done.
  12. I'll take them Neil if they are still for sale. PM on its way. Alex.
  13. to the forum mate. Just down the A9 near Dunkeld. Alex.
  14. Fully working pre owned heater control units in stock at the moment. Just drop me a PM if I can help further. Alex.
  15. Michelle, OEM gives you better "cover" protection. Both offer similar chassis stiffening. Both are easy to fit providing you do not snap any of the fixing bolts or nuts, The end brackets only require replacement if they are badly corroded. PM received and replied to. Alex.
  16. Just back from the shop after fitting 2 rear W braces this afternoon. One of my customers went for the OEM W brace and end brackets and the other went for the after market W brace with the end brackets. New OEM W braces in stock. New OEM W brace end brackets in stock. Preowned OEM W braces in stock. Preowned OEM W brace end brackets in stock. New after market W braces in stock. Just drop me a PM if I can help further.
  17. 2 x sets 19" in stock with or without tyres. Just drop me a PM if I can help further. Alex.
  18. This is a JDM set up and not required with the Samco.
×
×
  • Create New...