ZMANALEX

Some peeps are having difficulty sending me PMs Not every one, just a few as far as I know. Can one of the team have a look please. Thanks Alex.

Try again please and if you still have a problem let me know hear or open a new thread. Alex.

Just messing with you Paul. Mine cost £850.00 as well

So £650.00 well spent then ?

I have one new OEM "W" brace in stock which was meant for my own car and a pair of rust free pre owned end brackets. Regards, Alex.

Colin, My mate transported it down as that is his day/night job. Down for new mohair roof and the Syvecs S6+ and maps. Had a traction issue that my current FCon V Pro ECU set up could not handle, so took the plunge with Syvecs S6+.

Rumbled:

http://www.lexus.co.uk/car-configurator?RC/1b0a3012-4b74-48e5-8b8e-da982905016a/configure

Replacing or upgrading the fuel pump is relatively easy on the 350Z, just remember to carry this job out with less than quarter tank and always replace the large rubber O ring when you are in there. If your build consists of going FI then definitely upgrade the pump. If your build is NA and you are concerned about the pump then simply check the fuel pressure. If the pump is a bit noisy then I would consider swopping out or at least pull the pump and clean out the fuel filter. Alex.

to the forum.

He mentioned Josh above Alex so I think he's the member who bought Bodyboarder81's Zed which was an 08' HR Zed. Link: http://www.350z-uk.c...harged-now-15k/ If that is the case, the MM rad. that he linked to his first post is for a DE. So that will be an added fitment issue.

Just to be clear is your 350 a DE or HR ?

Can't remember the core size of stock, however the linked Koyo is 36mm IMHO Koyo are a superior brand to MM. 500 is max for the 36mm Koyo. If you prefer to have the thicker core then some fabrication will be required to make it fit.

to the forum.

This will fit and will work up to a maximum of 500bhp. https://www.google.co.uk/?gws_rd=ssl#q=koyo+V2577

Why does it not fit ? Is it the SC that is causing the issue ? Would it fit if the SC was not installed. ? I have always used Koyo radiators and have had no fitment issues with SC or TT.

to the forum.

You should really top up with similar to what is in the system at the moment. However L248 is what Nissan recommend and is circa £20.00 for 4 / 5 lts.

to the forum.

Come on guys they have to make a crust, however they are legit just greedy legit. I have a plate for sale with them at the moment and I am asking 50K as I know how they work and in the end I would be happy with 40k Gives them some wiggle room. Alex.

Yeah, they are legit, however they are just a broker and all prices are negotiable.

Had the same issue about 2 weeks ago. It was simply lack of use and a temperature issue.

Best to get it up to temperature before roof operation is attempted. As Pete has said, minimum of 5 degrees C however operation will be easier on the motors, in particular 5th bow if 10 degrees C If major surgery required then this may help: http://pdf.textfiles...upe/2005/rf.pdf Alex,

Sounds like a faulty R/H switch. I should have a pre owned one in stock. Just drop me a PM if I can help further. Alex.

Thanks for the referrals guys. End brackets are in stock and good to go same/next day. Alex.