Jump to content

S14DST

Members
  • Posts

    51
  • Joined

  • Last visited

Location

  • Location
    Latvia

S14DST's Achievements

Z Hopeful

Z Hopeful (2/7)

7

Reputation

  1. Does anyone why oem pilot bush i ordered is too small for my crankshaft? On bearing outer diameter iz 19mm but as measured on my crankshaft, it should be around 20.6mm or something like that... Where can I get the proper one? Oem code I ordered: 32898-CD000 Sorry if this is a common issue, but quick google search didn't help!
  2. Probably he has, but i actually would like to know something about that part from ebay and infiniti swap...
  3. So my zed is in need of a new power steering pump, because current is noisy and steering is heavy, plus it's leaking... My question is, is this any good http://m.ebay.co.uk/itm/Replacement-PAS-Power-Steer-Pump-02-07-For-JDM-Import-Z33-Fairlady-350Z-VQ35DE-/151430790443?nav=SEARCH or should I be better off with used oem item? I just think taht brand new is always better than used item... Oh and I have 03 model! Is there any difference with pumps over the years, and maybe they are interchangeable between infiniti fx35?
  4. Hey guys, I have issu with my 03 zed, 3rd gear syncros are dead and need to find a replacement, does anyone know oem part number for 3rd gear syncro? I've only found 2nd gear oem number (32620-CD008) Even on some parts stores they don't offer me syncro for 3rd gear...
  5. Looking for a lightweight flywheel at the moment! I'm looking into new driftworks superfly, but interested in some used items, of course in great condition and still plenty of life left in them.
  6. Yeah, but it's wierd that there is no rattle on extra noises from the gearbox, it just won't engage 3rd gear... But what's an average price for cd009 boxes today?
  7. So yesterday I was out on christmas drift practise and on my second run I completely lost 3rd gear... I can shift into it with or without clutch pedal pressed, but there are no extra noises or something that might seem wrong with the gearbox! It app happen on a very wet surface and 205/55 r16 rubber, so I don't thing the gear shattered, because I've been banging 3rd gear all season on dry surface and even clutch kicking on 265/35 r18 rubber! I's an 03 de model with a weak gearbox... It already had bad synchros from 2nd to 3rd gear, but that shouldn't be the case right?
  8. S14DST

    Harness bar

    Yes there are topics about harness bars, but I'm looking specifically for some sketch of some sort with all dimensions... I want to build my own bar but need some dimensions as starting point, Z is far away from me so I won't be able to take measurements myself
  9. Ok, so maybe I should start with a proper oil catch can breathing into air and see how it works, if that won't help, then it's piston rings for sure :/ But what about valve seals, can't they be faulty/worn? P.S it would be great if someone had a link to a proper/best catch can setup for N/A vq35de with breather setup Oh and mileage is just under 83k miles... But engine was swapped, because genuine engine was first twin turbo in our country which was broken aparts... But previous owner said that this engine is from a lower mileage car and was auto...
  10. Pcv valve is working properly and piping seems to be ok... But compression test won't show me the condition of oil rings does it? Because compression is made by the 2 or 3 compression rings... And I had bad piston rings on my daily mazda, the affect was that on cold start until engine is fully in working temperature it had a blue smoke coming from exhaust... I tend to thing that problem isn't in piston rings, because it doesn't smoke daily driving it... I had a blue smoke on highway when I did 50-100mph pull 4-5th gear... It did smoke for a few minutes and then it was back to normal. Maybe I should check all of the pcv sytem pipes from blockage? Or maybe there are something else to check? Will do compression test as soon as I get to my garage...
  11. Oh... And I decided to do this, because after some hard drift laps I get blue smoke from exhaust for a while... I think that pcv system is causing this, because I've read that vq tend to use oil when driven hard :/ (only cats left in exhaust system, got 3" stainless fitted)
  12. Hey guys. I recently decided that I need to put breather filters on my pcv system... Is this ok with 350z and it won't need any remap or something else to run properly? I want to put a breather on pcv valve and shut the hole on intake pipe, maybe will add a second breather for LH cylinder head if neccessary... I haven't reasearched this properly, but I've done this on all my s13's (sr,ca) Any opinion or help would be great
  13. And the interesting thing is that when the car was working, there were no rattling noises... I suppose the air flow pushed it away from blades, and only touched them on shutdown
  14. Fixed... Embarrassing but it was a noisy fan, or to be exact one of the plugs decided to set itself free and attack my fan blades Well at least it was an easy fix with couple of zip ties and I'm happy that my Zed is running strong )
  15. So nobody has any advice? :/ The only thing I might think of is starter motor, but that could be it, because then it would rattle all the time I'm driving...
×
×
  • Create New...