ZMANALEX

Just go to your Nissan dealership with your reg number or vin number and they will sort you out.

Correct.

Best with the same style as the rears with the studs part of the spacer.

As others have said above. Total cost for Exedy oem clutch kit and oem DM fly including labour will be circa £900.00.

7 day delivery from USA

If you have a use for the ARDS licence then why not, however if you don't compete or attend test sessions, then you really are perhaps wasting your money.

Nice one Imc PM received and replied to. Alex.

Depending on the exact position where the roof stops, will determine what procedure you have to follow. Firstly lubricate the 5th bow lock assembly with Genuine Nissan Window Regulator Grease. If this does not fix your issue, twist the auto-closure wire back into the closure motor. Lastly if still not working, remove and refurb the 5th bow motor.

There is a fix for this, without replacing the motor.

That should be what you are looking for, so just quote that to your Nissan parts department. And check that it fits all locking nuts before you store it in the boot.

The part number that you have provided is for the complete wheel nut locking kit and will bare no resemblance to the locking socket. Have a look in the car for a small plastic bag with the locking socket part number on it. Failing that, head to Nissan as most dealerships keep a master socket set. Last resort, buy an emergency locking nut removal kit, and get the old locking nuts off and then buy another set of new locking nuts

Try harder.

Go back to the dealer as it is there responsibility.

But not a forged stronger option for reasonable money.

Tyre Pressures, Low or wrong PAS fluid Universal knuckle on steering column seized or sticking PAS pump. Steering rack. All parts are in stock at the moment, and good to go same/next day. Just drop me a PM if I can help further. Alex.

Providing it fits in the bottle and the fittings are the same, then all should be good.

Low Octane Fuel ? Surely not.

Quite a bit to travel for a 10 bhp gain.

to the forum.

Get it checked out, probably what has been said above, however, better safe than sorry.

Clear the codes as some may be archived. When EML comes back on post the new codes up here. I should have most parts in stock to fix your issue. Alex.

Result, Top Man:

to the forum.

Defi, preferably Defi Link System. Probably got pre owned in stock.

How do I go about getting it all in one topic? See Girnet's post above #2