Thought the space saver went on the rear - doesnt clear the front Brembos?
Got me thinking now - is that why the "bolt" is fitted to the front hubs to stop the spacesaver being used there, as you fit the rear OEM wheels on the front with the bolt in place.
2006 hand book warning notes about the spare and no other warnings I can see about not using on the front/rear axles :
The T-type spare tire should be used
for emergency use only. It should be
replaced by the standard tire at the
first opportunity.
Drive carefully while the T-type spare
tire is installed.Avoid sharp turns and abrupt braking
while driving.
Periodically check the T-type spare
tire inflation pressure, and always
keep it at 60 psi (420 kPa, 4.2 bar).
Do not drive your vehicle at speeds
faster than 50 MPH (80 km/h).
Do not use tire chains on a T-type
spare tire. Tire chains will not fit
properly on the T-type spare tire and
may cause damage to the vehicle.
Tire tread of the T-type spare tire will
wear at a faster rate than the standard
tire. Replace the T-type spare
tire as soon as the tread wear indicators
appear.
Because the T-type spare tire is
smaller than the original tire, ground
clearance is reduced. To avoid damage
to the vehicle, do not drive over
obstacles. Also, do not drive the vehicle
through an automatic car wash
since it may get caught.
Do not use the T-type spare tire on
other vehicles.
Do not use more than one T-type
spare tire at the same time.
Do not tow a trailer while the T-type
spare tire is installed.
Which means my idea of using 2 spacesavers is out