RobPhoboS

Brilliant stuff. I want to head over when you fire it up!

I tried reading one of his books - I can't get past the usage of irritating names. I had to give them back to my mate.

Same here. I'm glad the kindle isn't.

I can't work out if that is good or bad ???? I've got the Arcan one which is around £90 - and I think it's brilliant, although I have to use a 2nd jack at the front before I can get it under the middle of the car (not even low, on Tein springs) http://www.costco.co.uk/view/p/arcan-2000kg-aluminiumsteel-service-jack-model-hj2000eu-900930

Cheers for the clarification on timing jollyranchers, I've had it flashing for a week or so after adjusting my steering wheel.

I just finished: http://www.amazon.co.uk/Watermelons-Green-Movements-True-Colors-ebook/dp/B005BE0S02 & now on: http://www.amazon.co.uk/Goliath-Life-Loathing-Greater-Israel-ebook/dp/B00B3M3TPC/ref=sr_1_6?s=digital-text&ie=UTF8&qid=1456746279&sr=1-6&keywords=goliath Easy to read, heavy subjects.

160kg on my deads now, aiming for 200

I'm guessing it was me as I was heading to the gym. I've seen a couple around as well, usually give a

If you've searched here and can't find much, try my350z.com I've seen plenty of threads there about both subjects.

I still can't believe I was asking this and had eibach bolts on my desk that I could have measured. Heh. As it turned out, no problem with the bolts all good with a bit of plus gas.

That was me 1st time spotted, I've only had the thing 3 year's haha

No, I'm just looking at switching out the rear arms for adjustable camber, and then the toe bolt - oh ffs I've just realised bloody got the bolts in my hands. :lol: :lol: p.s - DW will replace any parts if you have issues.

A proper long shot but I just wondered if anyone knows the sizes of these bolts ? (& the pitch of the threads) I'd just like to know in case of anything snapping or going awry

Just to say I did my one last week, very easy and quick to do, although I needed a second pair of hands to pull the old resistor off of the board. It seems to have sorted out the bass issue but I still have the thwack the side of the headunit (passenger footwell bit) to get the full volume out of it. I'm not exactly sure what the cause of that is.

A local garage to me can get you any bride or cobra seat cheaper than anyone in uk. Some one just got a custom set of cobra evolutions cheaper than a set of standard ones would be. I could be interested later in the year, so will probably PM I know Bride are a good company but I couldn't have BRIDE written in my car, looks stupid imho

This thread is bloody ridiculous. I love it.

Any recommended (affordable) seats to sling on top ?

From my personal point of view, regarding immigration since it's been mentioned I have zero problem with people coming here to work, and to start a new life and doing their best to learn English. I have a huge problem with uneducated masses arriving and expecting hand outs and segregating themselves. It would be good for people to do as the OP said, research first and make up your own mind. Stop feeding from mass media, it's all bloody biased as fook

One thing I have to say, forget what what magazines and us lot say (in regards to a motor), forget what the statistics are. Make a shortlist, go and drive them, then make a decision. It's cool to ponder and what not but ultimately you need to experience the thing and go from there Personally I couldn't give a flying-fook what I turn up to work in, and if it's that outlandish, just get a £500 shitter to arrive in.

It didn't look impressive to start with

Welcome back mate ! Looked like a mega trip for both work and, dare I say it... culture Now. GET BACK TO WORK

I have a very good mate that does this if anyone needs it doing, decent quality stuff that's used on various supercars. Being as you're from Surrey and mention supercars, are you referring to Valet Magic? They do a LOT of supercars and are impeccable http://cgperformance.co.uk/services/paint-protection-film/ Lots of options available but I know the owner as a friend, totally trust

I have a very good mate that does this if anyone needs it doing, decent quality stuff that's used on various supercars.

I saw a fibreglass boot go for about £130 or so.

It's funny there's an insistent dude on the US forums saying they are junk (not sure if he meant all or just one or two parts)