ZMANALEX
-
Posts
14,825 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by ZMANALEX
-
Nice one mate, thank you.
-
Both in stock and good to go same/next day. Just drop me a PM if I can help further. Alex.
-
Paul, New bolts for rear Brembo 350Z calipers are in stock and good to go same/next day. Just drop me a PM if I can help further. Alex.
- 1 reply
-
- 1
-
-
You do not have to compare, just trust me and believe what I am saying, been there done that. Alex.
-
Not in this instance I am afraid. New after market will not be manufactured by the same company as new OEM Genuine Nissan.
-
Pre owned in stock and good to go same/next day. Just drop me a PM if I can help further. Alex.
-
Unfortunately not.
-
Are these motors not aftermarket ? Genuine Nissan new power window motors are only £179.00 from forum traders. Worth paying a bit extra for the genuine article and a local warranty IMHO.
-
to the forum.
-
Yes agree not much room for that one however certainly doable in situ. trust me. Otherwise if you can not find any one with the suitable skills or desire, then just slip the engine and gearbox forward an inch which would take about an hour, but really this should not necessary.
-
Oh! and in answer to your original question, probably circa £500.00 to remove and refit the head.
-
All 10 bolts on the L/H bank are accessible for removal if broken, granted the rears have less room to work around, but it is certainly doable with out taking off the head, providing you have the correct tools and a little skill.
-
to the forum.
-
So passenger side? which is the left hand bank.
-
Really! What bolt is broken? An image / picture would be best. Alex.
-
to the forum Simon.
-
This is a bit of a saga Gary, your heading states "engineering solution help" Just use a socket of the correct size. If you do not have a socket that is sized to your liking then just machine it down, either externally or internally or both. Simples. Job Done. If you get really stuck, then just nip up to Perth and I will press it in for you.
-
Air Con - Help Troubleshooting & Resolving Issue
ZMANALEX replied to alexwitham's topic in Servicing
Informed diagnoses is never cheap and sometimes exceeds the cost of the repair. Find a friendly air-con specialist who should be able to find the fault cheaply and quickly. Avoid establishments like Kwik-fit etc. All parts that you may require are in stock and good to go same/next day. Alex. -
I should have a few of these pipes in stock. Just drop me a PM with the year and model of your car. Alex.
-
A socket of the correct size will work fine.; Does not matter if the old bush gets damaged on removal. Just be careful when pressing in. Saw the press in your image.
-
If you do not have the proper tool then just use an old socket of the correct size.
-
to the forum.
-
Preowned prop shafts are in stock if required. Just drop me a PM if I can help further. Alex.
-
Alex have you used PF compound eg 01 or pagid rs 15 or 29? If yes how does it compared to the car carbotechs 10/12? I have used PF01 and Pagid RS29 and I prefer Carbotech. Each to there own thou. Try them, however 12 may be overkill for your application. Alex