Jump to content

ZMANALEX

Members
 View Profile  See their activity

  • Posts

    14,924

  • Joined

  • Last visited

 Content Type 

Everything posted by ZMANALEX

  1. ZMANALEX
  2. ZMANALEX
    to the forum.
  3. ZMANALEX
    Not a fan I am afraid.
  4. ZMANALEX
    Is there a way of testing it off the car? Yes, simply block off the ends and pressurise and check if it is holding pressure.
  5. ZMANALEX
    At the Classic Vehicle Auction at Errol Airfield near Perth. Chatted to him for around 15 minutes, and found him to be quite a friendly knowledgeable chappy.
  6. ZMANALEX
    I have heard that you enjoy a challenge, so this GT-R should fit the bill.
  7. ZMANALEX
    This: ^^^
  8. ZMANALEX
    PM received and replied to Rory. All parts in stock and good to go same/next day. Alex.
  9. ZMANALEX
    to the forum.
  10. ZMANALEX
    Depends what the car is to be predominantly used for, however DS2500s are very popular.
  11. ZMANALEX
    Massive.
  12. ZMANALEX
    Ferodo DS 2500.
  13. ZMANALEX
    to the forum.
  14. ZMANALEX
    Short shifters are like Marmite and you will have to carry out a bit of fettling to get it to fit and work properly. Pre owned 350 DE and HR OEM shift sticks in stock if required. Just drop me a pm if I can help further. Alex.
  15. ZMANALEX
    to the forum.
  16. ZMANALEX
    There is no need to panic if you have this issue as your motor is not going to go BANG. Just be aware of the lowish oil pressure and drive accordingly until you replace the gaskets.
  17. ZMANALEX
    What Z1 have said is correct: If the HR has low oil pressure caused by the leaking gaskets the inlet cam control is slow in responding and the idle is also a little erratic.
  18. ZMANALEX
    Perhaps the train company instructed DPD to leave in a "safe" place or with a neighbour in the event that you were not in. These options are available when making the on line booking.
  19. ZMANALEX
    DE or HR ?
  20. ZMANALEX
    to the forum
  21. ZMANALEX
    They can only drop the small metal sump pan with the engine insitu which will not reveal much. To remove the aluminium sump, to inspect the crank, the engine will have to be removed first.
  22. ZMANALEX
    It will be your Eurocarparts brake pads.
  23. ZMANALEX
    Chris, After looking at your images I would be inclined to think that you would be best swopping out the complete roof with one from a breaker. That would then do away with any unforeseen issues and the aggro. Alex.
  24. ZMANALEX
    to the forum.
  25. ZMANALEX
    Nice one mate: Just to be clear, ping me over a picture of the hose that you require as I will have it in stock. Alex.
×
×
  • Create New...