jnoz

Hi all, so I'm developing this billet cover. I have a 2015 Nismo, but this is a design based off the main cover. Taken me a while to get this far. As I've ensured my design is dimensionally as per the OEM cover. A lot of cost involved for me, so don't want to screw this up. Thought I'd just post and see what you guys thought. I'll be doing a few design changes, and when it's finished I may have some more ideas and make another one with different styling, just seeing where the ideas take me really. Thanks for looking.

yes. there is. but im going to make my own spacer. but this one has a rubber seal integrated within the spacer, rather than being just a separate gasket

My skunk spacer arrived! It turned up, and it's made from PLASTIC! Well gutted for the price. I'll be making alloy ones. Hope it goes okay! Need to find how I will gasket it. Plenum gaskets cheap enough surely.

I'm in the progress of making some of these. So really glad the thread came up! How much do the gaskets cost for the intake? Wow, that linked spacer is £253.18!

Wanted for trial regarding increasing bore size. Thanks

I do agree with pretty much all the comment I'm seeing guys. Opening the entrance of a bottle neck indeed won't remove the restriction half way down the neck, the smallest point must indeed be increased. I need to get my hands on a spare intake really, and review how much it can be adjusted. I have a spare 100mm throttle body that would really allow a comparison. Obviously this is all expensive R&D just for a single thread. Does anyone have a spare throttle body for sale? Seem to be around 40 pounds on eBay.

Was just curious really. Thought that was a bit odd. Will get myself a spare throttle body and see what land I have spare to machine out.

Once I've done it I'll throw up a photo. Working on a few other products at the moment. Also be looking into the 370z setup as have one of those to hand also. Hey, just seen this, throttle body spacer. What the hell? 4-6HP? http://www.ebay.co.uk/itm/Nissan-Altima-Maxima-Pathfinder-350z-Infiniti-G35-Throttle-Body-Spacer-FIT-3-5-/131743080814?hash=item1eac7fe16e:g:UDIAAMXQzkZRmsYn

I have my own. Maybe hit me up if you don't get any luck with them

Hi all, Has anyone tried this at all? I've got a machine shop to hand, was going to open up the throttle body and use a larger butterfly flap. I'm going to dyno before vs after. Looking to do a range of little upgrades like this before the remap. Feedback appreciated!