GMballistic Posted January 4, 2014 Posted January 4, 2014 Beat me to it GM ! Yeah as GmBallistics pic Got to be quick round here ~ usually glrnet or WhackyWill beat me to posting up an answer. No chance at this time of day from me buddy Good to know. Quote
Humpy Posted January 4, 2014 Posted January 4, 2014 Beat me to it GM ! Yeah as GmBallistics pic Got to be quick round here ~ usually glrnet or WhackyWill beat me to posting up an answer. No chance at this time of day from me buddy Good to know. Right after a bottle whiskey Quote
DARE350 Posted January 5, 2014 Posted January 5, 2014 Like the 1000s before me I removed the number plate brick, a nice subtle change. Will have something more of note by the end of next week where it might even be worth starting a project thread. Quote
ddcboyle Posted January 6, 2014 Author Posted January 6, 2014 That cant be real lol... one side would surely move, and would defo move if someone got our the car haha. 1 Quote
chirag1988 Posted January 6, 2014 Posted January 6, 2014 Like the 1000s before me I removed the number plate brick, a nice subtle change. Will have something more of note by the end of next week where it might even be worth starting a project thread. Its it just stuck on with 3m double sided tape? I'm looking to do mine, but it doesn't really stand out that much with the surround as my Z is black already Quote
Grundy Posted January 6, 2014 Posted January 6, 2014 Nismo Front Lip, Tarmac Side Steps, And a JDM Rear Diffuser 1 Quote
Stutopia Posted January 6, 2014 Posted January 6, 2014 Looks sweet grundy, works especially well with the wheels 1 Quote
DARE350 Posted January 7, 2014 Posted January 7, 2014 Its it just stuck on with 3m double sided tape? I'm looking to do mine, but it doesn't really stand out that much with the surround as my Z is black already Right now it's using some double sided sticky foam strips which I heated up with a hairdryer to hopefully get it stuck properly. Only really need to worry about the rain wearing them away because it's definitely stuck fast, will buy some proper number plate tape if it ends up coming off. Bet you would be pleased with the change, mine was more grey with age so I can imagine against your black paint it looks pretty dull and faded unless you use a lot of Back to Black? Quote
HAMLNJ Posted January 7, 2014 Posted January 7, 2014 I modded my car with a nice low front bumper scuff while hitting a high kerb again today. Lovely. Thanks mr concrete. Quote
AliveBoy Posted January 7, 2014 Posted January 7, 2014 I modded my car with a nice low front bumper scuff while hitting a high kerb again today. Lovely. Thanks mr concrete. Favourite part of this? "again!" I suggest reversing into spaces 1 Quote
ddcboyle Posted January 7, 2014 Author Posted January 7, 2014 I modded my car with a nice low front bumper scuff while hitting a high kerb again today. Lovely. Thanks mr concrete. Favourite part of this? "again!" I suggest reversing into spaces Men cannot drive into spaces. Only reverse. Women cannot reverse into spaces. Only drive in. I still have to do a 50point turn to drive into a space, i dont understand why people choose that over reversing in lol Quote
HAMLNJ Posted January 7, 2014 Posted January 7, 2014 I modded my car with a nice low front bumper scuff while hitting a high kerb again today. Lovely. Thanks mr concrete. Favourite part of this? "again!" I suggest reversing into spaces Haha love it. I'm going to get it re sprayed so I guess I'm just getting my money's worth! Quote
Humpy Posted January 7, 2014 Posted January 7, 2014 Nismo Front Lip, Tarmac Side Steps, And a JDM Rear Diffuser Only just caught up with this, look like you have been busy since the car meet in Salisbury. Looking good Quote
AliveBoy Posted January 8, 2014 Posted January 8, 2014 I modded my car with a nice low front bumper scuff while hitting a high kerb again today. Lovely. Thanks mr concrete. Favourite part of this? "again!" I suggest reversing into spaces Men cannot drive into spaces. Only reverse. Women cannot reverse into spaces. Only drive in. I still have to do a 50point turn to drive into a space, i dont understand why people choose that over reversing in lol and leaving is SO much easier! just drive out! no back and forward at all, swing out across both lanes and reverse into the space in one hit to get in and then just drive out to leave! 3 Quote
GMballistic Posted January 13, 2014 Posted January 13, 2014 Just fitted a Stillen Air Induction kit from Tarmac Sportz. Took me awhile to fit as I went on a cleaning frenzy first and after I had finished fitting the kit I realized on closing the bonnet that it was sitting too high. Doh. One hour passes, lot's of swearing & several cigarettes later it was fitted properly this time. Only been out for a short drive just to check there where no issues but so far I'm happy. Quote
KyleR Posted January 14, 2014 Posted January 14, 2014 Just fitted a Stillen Air Induction kit from Tarmac Sportz. Took me awhile to fit as I went on a cleaning frenzy first and after I had finished fitting the kit I realized on closing the bonnet that it was sitting too high. Doh. One hour passes, lot's of swearing & several cigarettes later it was fitted properly this time. Only been out for a short drive just to check there where no issues but so far I'm happy. 1 Quote
ZEUS Posted January 15, 2014 Posted January 15, 2014 Finished work early so I fitted led side light bulbs and then wrapped the steering wheel controls . They were scratched so I had to do something with them! 1 Quote
Stutopia Posted January 15, 2014 Posted January 15, 2014 Finished work early so I fitted led side light bulbs and then wrapped the steering wheel controls . They were scratched so I had to do something with them! Nice job, it never even occurred to me to wrap them. I've got scratches and CF wrap lying around, if only I could put 2+2 together! 1 Quote
ddcboyle Posted January 15, 2014 Author Posted January 15, 2014 How did you find it in the button area for wrapping? I tried to interior wrap, maybe I was using the wrong stuff, but it didn't seem to stick properly and couldn't get a fine enough cut round the button controls Quote
ZEUS Posted January 15, 2014 Posted January 15, 2014 I made paper templates first and cut out the button slots slightly smaller than needed. This meant no cutting on the car , then I applied it to the wheel , heated until very soft and used a feeler gauge of all things to just tuck all the edges under. Simple....ish! Quote
ddcboyle Posted January 15, 2014 Author Posted January 15, 2014 I made paper templates first and cut out the button slots slightly smaller than needed. This meant no cutting on the car , then I applied it to the wheel , heated until very soft and used a feeler gauge of all things to just tuck all the edges under. Simple....ish! Ah ^^ sounds like easy way to do it actually, atleast you didnt have to remove them, seems like a nightmare to do. Looks good though Quote
GIXXERUK Posted January 15, 2014 Posted January 15, 2014 Finished work early so I fitted led side light bulbs and then wrapped the steering wheel controls . They were scratched so I had to do something with them! quality touch holy knees though 2 Quote
ZEUS Posted January 15, 2014 Posted January 15, 2014 ^^ :lol: I really need some new work trousers but I've spent all my cash on the zed ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.