ZMANALEX

Let me have your address details and I will send a stud and nut off to you. Take it that you are not running spacers! Also front or rear? Alex.

Do you have a PAS oil cooler fitted and are you using the correct fluid. May be the PAS pump on its way out. I have all parts available including rack if required. Alex.

not too bad if your doing it yourself my concern would be if the chassis had been pushed back and if it needed jigging. i tended to avoid Cat D's Thatcham 350Z repair guidelines no longer allow recommended repairers to pull the front chassis legs on the Z or G35. Unfortunately most bodyshops with jigs have to follow the Thatcham guidelines. Replacement legs have to be fitted and they will not carry that out with the engine in place.

o/s/f chassis leg is damaged + all the other obvious stuff required will require around £6000.00 in parts alone

3 US qt = 3 x 0.94631 = 2.83893 lt. Which is close enough but top up to the required level asap if required. Make sure that the oil is SAE 75W-85 -API GL4+ Alex. Cheers Alex, already got the fecking wrong oil once (GL5) so got 3 tubs of that sitting there... think I'll just order another bottle from Opie and be done with it... Is Opie not Motul 75W - 90 ?????

3 US qt = 3 x 0.94631 = 2.83893 lt. Which is close enough but top up to the required level asap if required. Make sure that the oil is SAE 75W-85 -API GL4+ Alex.

Done the deed

Done the deed

I have the cure for this mate PM on its way. Alex.

Got the indelible stuff now Mike

Hi Dave, I have two front azure bumpers available but both require painting. Perhaps this may be an option for you as it will minimise downtime to the time it takes to swop over the bumpers. Let me know if I can help you further. Alex.

No worries Martin Just an age thing mate Dont worry, we'll be confiscating his keys soon Bus Pass: Bus Pass

No worries Martin Just an age thing mate

All in stock and good to go with no crazy prices Drop me a pm if I can help you further, Cheers, Alex.

Hi and welcome to the forum

In stock and good to go: Copper, Platinum or Iridium Pm if I can help you further.

This should help you. All parts available, just let me know what you require. I also have a JDM driver's side bottle. Alex.

On the picture of the Yellow GT4, the driver's side bottle is for the windscreen washers and the passengers side is for the headlamp washers

Is it the windscreen washer bottle or the headlamp washer bottle that you require or both? The pipework that you refer to, is it the pipework that connects the two bottles? Cheers, Alex.

Black or Orange available pm if I can help you further. Alex.

Plenty of these available Ian Alex.

Hi Mark and welcome to the forum

I can help you with this mate but for the avoidance of doubt could you send me over your VIN number. Cheers, Alex.

I have an orange one available Dibs must be followed up by a pm please. Alex.