ZMANALEX

Hi and welcome to the forum

I have a few in Scotland. Shipping £20.00. Alex.

I have plenty preowned coil packs available @ £20.00 each. If you can not identify which one is giving you the grief, then you will just have to swop out one at a time followed by a short road test until the issue is resolved. PM me if you would like one sent over. Alex.

I have Brand new Nismo Replica rear wings available. They come complete with a fitting template so no messing about measuring for where the holes get drilled. Drop me a pm if I can help further and I can send you over some images. Alex.

Hi and welcome to the forum.

Hi and welcome to the forum.

I have: New Nismo Style V1 (only one pair left) £100.00 Preowned OEM in Azure £45.00 Alex.

Just back from Knockhill Racing Circuit as it was an open pit lane 4 hour track seesion. It was yet another great day out and totally dominated by the representaion of Nissans. There were 4 x Azure 350Z, 1 X GT4 and 2 x GTR R35 strutting there stuff So hi again to Derek 350ZRoadster, Harry P and his mate in his GT4, Vik44 and her mate, Jamie Moy in his Roadster and the very friendly guys with the GTR R35s. Great to see you all there, must to it again some time. Alex.

Hi and welcome to the forum

Hi and welcome to the forum

Nice one Chris

http://www.pistonheads.com/news/default ... ryId=21472

Jamie, Give me a shout mate as I am just down the road from you and I will soon tell you if you are only running 181 hhp at the wheels and 222 torque. Alex.

No requirement to change PAS fluid, only top up, but if you still want to change then as above.

Paul, Further to your pm: Checked this out this morning for you and I should have a preowned Loom and IPDM in stock. The loom is already off the car but I would have to remove the IPDM to compare the part numbers. The IPDM unfortunately is not plug and play and will require to be reprogrammed. Let me know if I can help you further. Alex.

Checked this morning. In stock and good to go. Alex.

Hi and welcome to the forum

I should have that mate but I would have to check tomorrow. Alex.

I should have all the preowned parts that you are looking for depending on what model your car is. I have a few IPDM units and looms. I will require your full VIN number but in the meantime if you could confirm if your car is JDM or U.K and the year please then I can get started. Also if you could pm me further details of the quote ie a breakdown of parts and labour and any part numbers that they have given you as this would be helpful in identifying the correct parts. Welcome to the forum Cheers, Alex.

No mate they are only threaded the last 20mm as per Ross's picture. They should work a treat. Alex.

the spacer is exactly 22 mm thick so i guess i'll need something like a 80mmx5mm bolt. i am right in thinking these are an alan key head Correct and metric fine I think.

The oem ones are 60mm x 5mm

Matt, You will not have any restriction from the OEM cast exhaust manifold to any HFC or test pipe that you may choose to fit. The ID of the cast manifold is 2.15" (54.62mm) but it is resonated so the true ID is only 1.57" (40mm) Alex.

Hi and welcome to the forum.

I would say that £20.00 is a fair and acceptable amount as a token of your appreciation.