ZMANALEX

to the forum.

to the forum.

Andy Forrest: big name up here with the Scooby crowd:

Gary, You are correct that the fly is located with a dowel pin, however the untrained can sometimes still manage to fit it wrong. Alex.

I would be looking at the Crank Position Sensor or perhaps the flywheel fitted in the wrong position. Alex.

Drive it on a private road.

to the forum.

to the forum.

Despite what has been said on this forum many times over, the after market bracing is NOT a replacement for the OEM "W" shape brace which is fitted from the factory. As Dan has said, the after market bracing supplements the OEM "W" shape brace.

It really is horses for courses Andy, and there is always a trade off if the car is for both track and road. There is a TS 4 hour open pit, track event on Saturday 31st October at Knockhill if you are interested.

Why Quaife Andy ? I thought that you were to become our new track regular at Knockhill

Go talk to them and find out. Simples I won't happen sittin' on your ass.

Yes, seen that often, usually on the inside face of the rotor. However, should have been picked up earlier at service or pad replacement. As above, check all pistons etc, however normal wear and tear, bordering on neglect in my book. Alex.

In that case, check these guys out: http://www.tlcdetailing.co.uk/

Where are you based ?

Loom just unplugs at ECU and easy to pull through to engine bay and drop with the power unit.

Okay Bradders, you win: Let's start this off with the cheapest option. Yes or no and then we can move on. http://www.ebay.co.uk/itm/like/111684728753?adgroupid=13585920426&hlpht=true&hlpv=2&rlsatarget=kwd-75951448386&adtype=pla&ff3=1&lpid=122&poi=9046842&ul_noapp=true&limghlpsr=true&ff19=0&device=c&chn=ps&campaignid=207297426&crdt=0&ff12=67&ff11=ICEP3.0.0-L&ff14=122&viphx=1&ops=true&ff13=80

to the forum.

If you post up the parts that you or your engine builder want/require then your question can be answered. However as I said in my first post: GET YOUR ENGINE BUILDER TO SUPPLY THE PARTS. Your plan is a sure way to lose a friend if it goes belly up.

IMHO you are best to get your engine builder to answer these questions and also to supply all the parts. Once he has a full understanding on what your detailed requirements are, then he should be in a position to provide informed advice and recommendations.

to the forum.

to the forum.

I have pre owned in stock in various colours. Wait a minute, if you mean the black plastics then I have them as well.

to the forum.

to the forum.