Sam Mcgoo

Police man from 'allo' allo "good moaning. I was pi**ing by the door when I heard a gun sh*t. " Love trigger's lines in only fools and horses..... Such as having the same broom for over 20 years..." 17 new heads and 14 new handles"

That is not nice, but far from the worst I've seen. This however came up in the suggestions underneath. http://m.ebay.co.uk/itm/Dodge-Viper-Replica-Fiero-Venom-Factory-Built-2006-Part-Ex-Possible-/181910464817?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202351%2526meid%253D5cdcb3c4cb264d0a9b8a64c0b7baf821%2526pid%253D100408%2526rk%253D1%2526rkt%253D14%2526sd%253D321902392495&_trksid=p2056116.c100408.m2460

He already has CAT6 throughout so doesn't need home plugs. I've had mixed results with extenders too, I'd reach out to "Commander" as he's our resident expert on such matters For anyone else reading this that doesn't have CAT5/6 cable throughout and suffers from poor wifi range in the home, I installed these this week and they appear very good (from an amateur point of view) . http://www.amazon.co...F55K6YRVM7J3TK4 I now have seamless wifi at both ends of my house and on both floors.

Yeah really enjoyed that. So much action right through the whole field. Well done Lewis! And yeah, Rosberg is a sulky ****.

Welcome to the club.

If it's length your having trouble with, you can cut them down a bit. I had to do it in the past when the bolt is too long and it doesn't clamp the sandwich plate tight.

However, I'm a nice bloke... So I will. Try zmanalex, R35LEE for used, or Clark motorsport, tarmac sportz or torqen for new. May also be worth a shout to abbey motorsports and Horsham development in case they've stripped out one for track use recently. I assume this is because you've removed that massive spoiler and are getting it a bit more Road car than track?

I don't want to give you any advise, as I'm still gutted that you put a deposit on the car I wanted just a matter of hours before me!

Noooooooooooooo!!!

I ran mine like that for years without any issues. Engine - Sandwich plate for oil cooler - Sandwich plate for gauges -Oil filter.

Did you not read my post (#3)

I believe a faulty brake light switch on the brake peddle can also give similar fault indications

It could also be as simple as the brake fluid reservoir being a little low. The 350 has to be on MAX. If it's low it can also light up the dash in a way you wouldn't expect.

I can highly recommend DBA T3 discs with Ferrodo DS2500 Pads. It is a great combination! While your there change to some braided brake lines and some Motul RBF600 fluid. You won't regret it.

Welcome to the club. A supercharged Zed is a joy to drive!

Hello MyNameIsJon MyNameIsSam Welcome to the club

:yahoo: :yahoo: Thanks Colin. Can you do this daily please.

Yeah, 3rd actually... However, as usual the other thread titles don't really show relevance to the content. So easily missed by the OP. I WISH PEOPLE WOULD ACTUALLY USE A RELEVANT TITLE WHEN POSTING! AGGHH Rant over.

If you have hfc and an exhaust, it's definitely worth starting with the spacers. Zmanalex usually has them in stock. That is, if the eml code you get it referring to the rear sensors (sensor2).

I assume, you intend on carrying on with the very regular track days/ sprints? If so, I would try and repair what you've got if it was financially viable. I hate to say it, but you've bent it now, so why take the risk of bending another one? Get it fixed and get back on track!

Just had a read through this, Car looks awesome Jonny! Propper good and power to match.

It's all pretty much been covered above. Worth measuring them to ensure they are indeed worn. You can take a file or grinder to them to get rid of the lip, but be cautious as you don't want to throw them out of balance. You can remove them and get them on a lathe. Or you can contact Marcus@discskimmers (trader on here) and he can do a professional job on them while still fitted on your car.

Good hub hp numbers. Great torque figure so that's 418 lbft? Good work.

Welcome to the club.