mlombard Posted October 19, 2014 Share Posted October 19, 2014 Hello Folks , Bought my 350 roadsters 3 weeks ago and loving it, loads of plans to get it as good as possible, W brace next on the agenda. Already using this site and the guides are fantastic ! and the members really helpfull can't wait to attend a meets and find out what people are doing to theirs . Quote Link to comment Share on other sites More sharing options...
GIXXERUK Posted October 19, 2014 Share Posted October 19, 2014 Quote Link to comment Share on other sites More sharing options...
WhackyWill Posted October 19, 2014 Share Posted October 19, 2014 Welcome to The Land of Zed.. Quote Link to comment Share on other sites More sharing options...
GMballistic Posted October 19, 2014 Share Posted October 19, 2014 Welcome aboard. Re: the W brace ~ If it's just surface rust then you could always recondition it yourself by removing all the rust (wire brush/wire wheel on a grinder) then repaint it with black Hammerite paint or similar. If it needs replacing then you could get a good condition second hand one from zmanalex on here. Link: http://www.350z-uk.com/user/9648-zmanalex/ ..Or have a look at the various members & member traders who may be breaking Zeds currently. If you want a new one there are a few professional traders on here that should be able to help you out for a lot less than the main dealer. Try The Cougar Store or Clark Motorsport ~ both can be found in the "professional traders" section. The other option if it needs replacing is to get an aftermarket replacement. This one from eBay is what a few members have purchased although best to shop around as I had seen this brace from another seller at £129 & not the £162 odd but still a lot cheaper than the OEM part. Link: http://www.ebay.co.uk/itm/Ultra-Racing-4-Points-Rear-Lower-Brace-Bar-Nissan-Fairlady-350Z-Z33-RL4-1259-/321080218855?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ac1df54e7 Hope that helps and enjoy the Zed. Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted October 19, 2014 Share Posted October 19, 2014 to the forum. Quote Link to comment Share on other sites More sharing options...
buster Posted October 19, 2014 Share Posted October 19, 2014 to the forum Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted October 19, 2014 Share Posted October 19, 2014 Welcome to the forum... Quote Link to comment Share on other sites More sharing options...
Bobby D Posted October 19, 2014 Share Posted October 19, 2014 When I'm next back in sunny uk I'll try and get a meet around this area as I don't live to far away! :-D Quote Link to comment Share on other sites More sharing options...
Will370z Posted October 19, 2014 Share Posted October 19, 2014 Welcome, just up the road from me. Lots joining in and around our area recently Quote Link to comment Share on other sites More sharing options...
Z_Lover Posted October 19, 2014 Share Posted October 19, 2014 Quote Link to comment Share on other sites More sharing options...
Ekona Posted October 19, 2014 Share Posted October 19, 2014 I clicked to find out what you were reading Welcome along! Quote Link to comment Share on other sites More sharing options...
Humpy Posted October 19, 2014 Share Posted October 19, 2014 Welcome Quote Link to comment Share on other sites More sharing options...
mlombard Posted October 19, 2014 Author Share Posted October 19, 2014 Welcome aboard. Re: the W brace ~ If it's just surface rust then you could always recondition it yourself by removing all the rust (wire brush/wire wheel on a grinder) then repaint it with black Hammerite paint or similar. If it needs replacing then you could get a good condition second hand one from zmanalex on here. Link: http://www.350z-uk.c.../9648-zmanalex/ ..Or have a look at the various members & member traders who may be breaking Zeds currently. If you want a new one there are a few professional traders on here that should be able to help you out for a lot less than the main dealer. Try The Cougar Store or Clark Motorsport ~ both can be found in the "professional traders" section. The other option if it needs replacing is to get an aftermarket replacement. This one from eBay is what a few members have purchased although best to shop around as I had seen this brace from another seller at £129 & not the £162 odd but still a lot cheaper than the OEM part. Link: http://www.ebay.co.u...=item4ac1df54e7 Hope that helps and enjoy the Zed. Thanks mate that's Great help I will have a look at it later and see if I can salvage it nice little project Quote Link to comment Share on other sites More sharing options...
mlombard Posted October 19, 2014 Author Share Posted October 19, 2014 Thanks for all the welcomes will try to get up a picture at some point . Yeah really keen for a meet so just let me know where and when and I'm in ! Quote Link to comment Share on other sites More sharing options...
Harryjax Posted October 19, 2014 Share Posted October 19, 2014 Quote Link to comment Share on other sites More sharing options...
JohnUKVetteNut Posted October 19, 2014 Share Posted October 19, 2014 Hi and welcome had my roadster 2years without any faults/codes. Very reliable beast. Just a question to any other roadster owners, do all roadsters have a "W" brace fitted? mine doesnt ( 2005 import) should it? JohnUKVetteNut Quote Link to comment Share on other sites More sharing options...
mrt Posted October 19, 2014 Share Posted October 19, 2014 Welcome to a great Forum. You will really enjoy your roadster. Like the w brace mod.Considering one myself. Let us know if you feel any improvement in handling. Quote Link to comment Share on other sites More sharing options...
RafsZed Posted October 19, 2014 Share Posted October 19, 2014 Welcome, I'm only in Thatcham so not far from you, nice to have another Z owner nearby. Quote Link to comment Share on other sites More sharing options...
Zeezeebaba Posted October 19, 2014 Share Posted October 19, 2014 Basingstoke here, possibly going to the Salisbury meet on the 16th of November. Quote Link to comment Share on other sites More sharing options...
samsniss350z Posted October 20, 2014 Share Posted October 20, 2014 Welcome to the forum. Quote Link to comment Share on other sites More sharing options...
Steel Lynx Posted October 20, 2014 Share Posted October 20, 2014 Welcome to the forum Quote Link to comment Share on other sites More sharing options...
tatooandy67 Posted October 20, 2014 Share Posted October 20, 2014 Quote Link to comment Share on other sites More sharing options...
mlombard Posted October 20, 2014 Author Share Posted October 20, 2014 http://i1050.photobucket.com/albums/s419/lombard1986/IMAG0056_zpse0tqgipb.jpg Hope this pic works this is the z just had the wheels done Quote Link to comment Share on other sites More sharing options...
GMballistic Posted October 20, 2014 Share Posted October 20, 2014 http://i1050.photobu...zpse0tqgipb.jpg Hope this pic works this is the z just had the wheels done Looks great. Next time though if you click on the "direct link" next to the picture and then click the "image" icon (looks like a polaroid picture) in the "reply to this topic" box on here you can then paste the URL link into that. That will then post the picture directly on the forum. Like below. Quote Link to comment Share on other sites More sharing options...
14N Posted October 20, 2014 Share Posted October 20, 2014 Hello and to the forum Is that a roadster and a K1 exhaust? Sorry...... IS THAT A ROADSTER AN A K1 EXHAUST?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.