Ortega_9 Posted January 28, 2013 Posted January 28, 2013 Hello. I thought i woud share my supercharged 350z drifter projekt with you... this is my first 350z, but have build a heep of jap cars... mostly nissans... I´m inhere to get inspiration, tech info and input about setup etc. My car is a 2004 350z gt-pack. The chassis is right now stripped down, caged, and getting new brakeline setup, coilovers, tie rod/ends, front hubs, rear and front ajustable arms etc, new fuel setup, new electrical system, ECU and getting the vortech V3 kit fitted to the engine... still heaps to do, and I´ll start a build tread with the car... just wanted to say hi and tell you guys what I´m up to If you want to I´ll be posting progress and preporations here aswell, http://www.facebook.com/OrtegaMsport but in here I´ll keep it about the car, and build anyways, a few pictures of the work in progress Quote
Dblock Posted January 28, 2013 Posted January 28, 2013 Looking good. Are you doing the work yourself? Quote
Ortega_9 Posted January 28, 2013 Author Posted January 28, 2013 thx... I´m doing all fabrikation and fitting my self. But I will need help tuning the new ECU as I never worked with VEMS before.. but trying to reed up on most things to get the picture.. Quote
evilscorp Posted January 28, 2013 Posted January 28, 2013 Cool build, when you fitting the vortech? Why did you need new front hubs? Quote
LRF4N Posted January 28, 2013 Posted January 28, 2013 Welcome, nice project you have going Let's also see the other nissans you have Quote
Sam Mcgoo Posted January 28, 2013 Posted January 28, 2013 Welcome to the club. Be good to watch this develop. Quote
Flex Posted January 28, 2013 Posted January 28, 2013 Hello. I thought i woud share my supercharged 350z drifter projekt with you... this is my first 350z, but have build a heep of jap cars... mostly nissans... I´m inhere to get inspiration, tech info and input about setup etc. My car is a 2004 350z gt-pack. The chassis is right now stripped down, caged, and getting new brakeline setup, coilovers, tie rod/ends, front hubs, rear and front ajustable arms etc, new fuel setup, new electrical system, ECU and getting the vortech V3 kit fitted to the engine... still heaps to do, and I´ll start a build tread with the car... just wanted to say hi and tell you guys what I´m up to If you want to I´ll be posting progress and preporations here aswell, http://www.facebook.com/OrtegaMsport but in here I´ll keep it about the car, and build anyways, a few pictures of the work in progress That's all great but the FB site is in bloomin NORSK so havent got a clue what's going on. Can you post subtitles in english 1 Quote
Ortega_9 Posted January 29, 2013 Author Posted January 29, 2013 (edited) thanks all. The FB page is a bit in Danglish i know :-) but I´ll try to post as much as possible inhere.. I can post a few pictures of post cars I´we build. Just sold my soarer and my old drifter to raise funds for this build... but here goes... And I´ll have to get some other pictures..the ones i try to upload are to big.. But here is one of my old drifter sil80 and a few of my soarer. But heres a danish site where my "old" cars are.. http://www.bilgaller...18583-_ortega__ and here is my old build threads, there is a few "imports" i sold inthere too, so not all of them were "mine".. but did alot of work on the cars to get them to Denmark and legally "MOT´d" here and sold. http://www.bilgaller...=2&userid=18583 But anyways, got the fuel rails off and picked apart yesterday. I´m gonna be running a AN 8 line from the tank to a swirlpot, and a AN 8 from that to a bosch 088 pump and from there to a Y piece, from that I ´ll run two AN6, one to each rail. and then again one AN 6 from each rail to my FPR and a AN 6 return from the FPR to the swirlpot ( and a overflow AN 6 from the swirlpot to the tank, and 660cc injektors... This might be a bit overkill, but atleast I wont be running lean.... I´ll be fitting the SC when I get the engine ready and back in the car... Hmm this might be a good time to start a build thread instead... Edited January 29, 2013 by Ortega_9 Quote
andy james Posted January 29, 2013 Posted January 29, 2013 Welcome along. Good luck with the project. Quote
glrnet Posted January 29, 2013 Posted January 29, 2013 We do like a project to follow, looking forward to seeing how this progresses Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.