Qirex Posted June 26, 2017 Share Posted June 26, 2017 Checking in as a new owner of a 350Z. I might have bought the cheapest UK manual on sale at 3300. What could possibly go wrong?! Well it threw a Mil, a TCS light and the nearside rear bearing on the drive home... And the clutch is paper thin, discs are older than moses and arches are rotten. I'm planning to tidy it up, make some chassis improvements and have some fun in it. If I reply slow, it's because my work blocks access here... Quote Link to comment Share on other sites More sharing options...
Scott TMN Posted June 26, 2017 Share Posted June 26, 2017 "Older than Moses" haha Welcome along mate Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted June 26, 2017 Share Posted June 26, 2017 Welcome to the forum... Quote Link to comment Share on other sites More sharing options...
Flex Posted June 26, 2017 Share Posted June 26, 2017 (edited) Perhaps you should have paid more? Sounds like you are about to spend quite a lot even if you're going to do it yourself. That said all the best with your journey. Edited June 26, 2017 by Flex 1 Quote Link to comment Share on other sites More sharing options...
coldel Posted June 26, 2017 Share Posted June 26, 2017 If you are handy with the spanners then you should do some of the work yourself - otherwise this will end up costing you more than a decent example straight up Welcome along, lots of great members advice on here and make use of the traders before you go ordering any tat off ebay 1 Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted June 26, 2017 Share Posted June 26, 2017 to the forum. Quote Link to comment Share on other sites More sharing options...
Stuggerz Posted June 26, 2017 Share Posted June 26, 2017 Welcome Quote Link to comment Share on other sites More sharing options...
veeg33 Posted June 26, 2017 Share Posted June 26, 2017 Hello, welcome and good luck Quote Link to comment Share on other sites More sharing options...
RS8055 Posted June 26, 2017 Share Posted June 26, 2017 Quote Link to comment Share on other sites More sharing options...
MDMetal Posted June 26, 2017 Share Posted June 26, 2017 Rotten things aren't good the rest sounds easy enough, discs and bearing can be fixed in a day I swapped out a bearing just a few weeks ago and didn't take too much hassel. 1 Quote Link to comment Share on other sites More sharing options...
kbad Posted June 26, 2017 Share Posted June 26, 2017 Hello and welcome along all the best Quote Link to comment Share on other sites More sharing options...
eatonm90 Posted June 26, 2017 Share Posted June 26, 2017 Quote Link to comment Share on other sites More sharing options...
Kev T Posted June 26, 2017 Share Posted June 26, 2017 Hello and welcome. Quote Link to comment Share on other sites More sharing options...
Keyser Posted June 26, 2017 Share Posted June 26, 2017 Sounds like you have a project Quote Link to comment Share on other sites More sharing options...
TT350 Posted June 26, 2017 Share Posted June 26, 2017 Methusela was older than moses. 969 years old. 1 Quote Link to comment Share on other sites More sharing options...
Mopedmark Posted June 26, 2017 Share Posted June 26, 2017 along Quote Link to comment Share on other sites More sharing options...
Qirex Posted June 26, 2017 Author Share Posted June 26, 2017 Those discs are only 800... Yep, it's a project, and deliberately so. I didn't buy cheap to save money as such, but because I have more fun in cheap cars. I don't want to worry about a pristine thing, just get in and have some fun. I'll be DIY all the way. I work for an OEM, so when needed I can access a workshop, but I'll mostly be in my garage. Sold the car this is replacing today, so shopping for bits soon, tyres, bearings and brakes. Maybe a rowdy filter. Quote Link to comment Share on other sites More sharing options...
GMballistic Posted June 26, 2017 Share Posted June 26, 2017 Welcome aboard. Quote Link to comment Share on other sites More sharing options...
davey_83 Posted June 26, 2017 Share Posted June 26, 2017 all the best, please blog the project and stick around Quote Link to comment Share on other sites More sharing options...
gareth29 Posted June 27, 2017 Share Posted June 27, 2017 Welcome and congratulations! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.