ZMANALEX

http://www.autocodes.com/p0300_nissan.html

http://www.autocodes.com/p2a03.html

Plenty OEM front and rear springs in stock. Just drop me a PM if I can help further. Alex.

Box out for the HR I am afraid.

When they fail you get little warning as the seal burst and the pedal falls to the floor and you are literally stranded unless you have the skills to start the car, get it in gear, change gears and get home or to a garage with out a clutch. The OEM CSC will fail again, however if you have an upgraded CSC fitted then you should be fine.

As above, get a few quotes for a repair and ask the neighbour to pay. You do not want a new quarter panel: trust me.

to the forum, refreshing to read of your dealer experience.

to the forum.

L & G are top drawer.

What ?

to the forum.

I previously dismantled a 350 and a G35 Skyline, both on oem 17" with Brembos, but I can not remember if they had spacers fitted. However, Rays and Brembo calipers and discs in stock if you decide to go that route. Just drop me a PM if I can help further. Alex.

In stock and good to go same/next day. Just drop me a PM if I can help further. Alex.

If divorced properly from the donor vehicle then they will be plug and play, otherwise, as what the guys above have said.

Plenty good original wings in stock. Just drop me a PM if I can help further.

Colin, I was just about to say that if the a/c is now blocked then these images will no longer be visible. Same applies if you start messing about with your images. I moved some recently to a fresh folder and they disappeared from the forum posts. I run PB Pro so loads of space. Hope you find a Free Fix, but I think pro may be the only option if you wish to stay with PB.

Thank you Jon, however you are cheaper than me for the facelift door cards so it would be more cost effective for Fluke to buy from you in this instance as I sell the facelift door cards for £100.00 each Alex.

The kit that you are looking at on Ebay will work on a DE but the Exedy clutch is not an upgrade. If you want an upgrade go for the Extreme from Ewen at CMS. Also buying from the States has the added implication of potential ball ache warranty procedures. Also you will have to pay 20% vat and duty on the imported parts once they hit the UK. So perhaps not the saving that you were hoping for.

All the above parts are in stock at the moment. Just drop me a PM if I can help further. Alex.

I will have for sale a 350Z twin turbo kit available soon which came off my DE 350Z. The kit is based around a pair of HKS 2530 turbos which have seen very little use. Alex.

As per our PM conversations you have stuff in that kit that you did not have to buy if just doing the Gally gaskets. Also, why replace like for like when upgraded is available for much less ?

Firstly I would check the battery condition, the battery terminal connections, then the engine earths. Then I would check the starter motor connections. If problem still there I would be looking at perhaps the starter motor.

Plenty front wings for collection from Perth. Alex.

to the forum.

to the forum.