Sim

Drift day booked, DWYB at Pod in February, my wife and I both have the day off so we can finally use up some of these tyres I've been saving up. Might be brave enough for the top track, we'll see how the figure 8's and kidney go first

@dave_7 are you selling or keeping the stock wheels?

https://www.willtheyfit.com Is worth a visit, put in current specs and compare them to the new specs, 370Z 19" GT Rays look great on a 350Z IMO, so I can't imagine other 19s not working.

I don't know Kaizers, but I'll vouch for Abbey, I always take my Z down there from leicester

Holy crap, that's a huge turd. Hope you have better luck with the swapped motor.

I'm not sure you'll get something good for your budget from a dealer, however, you should be able to find a good private sale one at your budget. They're great cars, but look out for a well looked after (regularly serviced) one.

Threads like this make me feel very lazy, if I get some extra time I tend to just go driving.

Looks like an awful crash, as others have said, as long as you're ok the metal can be replaced. We did look a GT86 for my wife when I pulled her 350z apart. Got close to buying a supercharged GT86, looked at one Abbey Motorsport had built, the extra power was very tempting, but a black rose 370z roadster won in the end.

I've had Berks and Cobras on mine and never had a problem passing an MOT as long as I get them red hot before going in.

The statement released by Merc is very telling, the FIA must have admitted behind closed doors that they (Masi) made a mess of it. I hope the steward/race control decisions get better next year because otherwise they'll lose more fans. PD: As much as I wanted Lewis to win, I feel sorry for Max to have won in this way as the crappy decision does tarnish his win.

I'd forge the lump and up the boost But then I'm an idiot Either way I wouldn't got back to a stock motor with no turbo kit, you wouldn't like it....

I love the MPS4S so much more grip in the wet

The reason for the pops is likely to be down to the separate amp being powered up but not the headunit, have you got access to a multimeter and the wiring diagram to see if power is getting to the head, it could just be a blown head sadly.

Does the head unit even power up? Or does it power up but you get no audio, just the odd pops?

I can't tell you for spot weld but for rivets I always use a regular drill bit, really sharp one, anything dull is a waste of time and just heats up.

Fkin global warming

Looks great, never seen those vented wings before

@V1H love the new wing, sits in just the right position. So many big wings look too far forward but that looks just right

That looks ok, wouldn't take much to get looking better, a finer mesh on the front and it would be much better. Odd that they list it as Nismo style, it's more mix and match and why the odd seats?

With if off the floor it wouldn't see any real load, so even totally knackered there'd probably be enough to push one or more wheels around. As @ZMANALEX said, if you've done the same thing with the wheels on the floor and the prop spins but you get no drive, it must be the diff.

Great to see you @davey_83 I'll try and get up earlier next time And thanks for the little video

Just do an MOT check on the DVLA website and stick the reg in, if it doesn't recognise the reg at all on there something is not right. https://www.gov.uk/check-mot-status

Good question, as I'd already swapped out the front to a hybrid S13 (Hubs, Knuckles, Brakes, coilovers) /S14 (tension rods, LCA, Tension rod Brackets) (although Abbey did have to fit longer tensions rods from an R33(?) as the castor was crazy), I had the ABS sensor on the S13 Hubs/Knuckles, so we're using that, it's mega accurate. Thanks, I'm very happy with how she came out

Its a 305 30 I think?

He does say ono in his advert, the worst you can get is a no. As Davey Said, they look great on a 350z as well