SHEZZA Posted June 23, 2016 Posted June 23, 2016 I just ordered my new springs and spacers yesterday, so looking forward to getting these little mods done. Then saving for my exhaust upgrade! í ½í¹ƒ Sent from my iPad using a hammer and chisel... Zeditus has certainly taken hold ! Keep up the good work. 1 Quote
Andy_Muxlow Posted June 24, 2016 Posted June 24, 2016 Yeah just s bit SHEZZA 😂😎 Sent from my iPhone using hammer and chisel! Quote
Brimstoneboy Posted June 24, 2016 Posted June 24, 2016 (edited) Not sure on splitter russyb maybe some forum members may know il try post a pic up later , taking my coilovers off this weekend sick of speed bumps and more so the uneven ground I have to drive over to get to my garage. more of a unmod . Sent from my iPhone using Tapatalk Edited June 24, 2016 by Brimstoneboy Quote
davey_83 Posted June 24, 2016 Posted June 24, 2016 (edited) ^ great on track, poor on road at anything lower than tein springs imo Edited July 10, 2016 by davey_83 Quote
Brimstoneboy Posted June 24, 2016 Posted June 24, 2016 (edited) Prolly stick some springs on later don't think I'd need much lowering maybe 10 -15 mm. Does it still effect the camber dropping that much will I need a camber kit .Another reason for loosing the coil overs . Sent from my iPhone using Tapatalk Edited July 4, 2016 by Brimstoneboy Quote
Dicaprio Posted June 24, 2016 Posted June 24, 2016 Arrive tomorrow and fitting at the weekend, Custom headlights Carbon dipped inside etc Demon eyes, colour changing Remote controled via mobile. Can be switched on even when ignition is off. Sequential led indicators with sidelights. Original sidelight and full beam now become one and come on together. How much did they cost you Mikey? Quote
MikeyM Posted June 24, 2016 Posted June 24, 2016 Arrive tomorrow and fitting at the weekend, Custom headlights Carbon dipped inside etc Demon eyes, colour changing Remote controled via mobile. Can be switched on even when ignition is off. Sequential led indicators with sidelights. Original sidelight and full beam now become one and come on together. How much did they cost you Mikey? £500 including return delivery.. sounds a lot, but not really when you break it down 1 Quote
MrChow Posted June 26, 2016 Posted June 26, 2016 Finally got round to fitting my new headunit today courtesy of ColinS. Surprisingly easy one you get to this point... then fitted.... course I had a little helper 2 Quote
Brimstoneboy Posted June 26, 2016 Posted June 26, 2016 Braver man than me, would never work again if I was let loose on it. Nice one tackling it . I finally un modded my suspension and took my coilovers off this weekend now just need to do full laser alignment and il be happy . The joy of not having to avoid roads with speed bumps. Sent from my iPhone using Tapatalk Quote
Cyder Posted July 3, 2016 Posted July 3, 2016 Swapped the sidelights for LED bulbs. Hands cut to shreds but it looks a lot better than it did with one bulb blown. The things I'll do to pass an MoT! Quote
Andy_Muxlow Posted July 3, 2016 Posted July 3, 2016 Well after our visit to meguiars on Saturday I thought I would try their headlight kit out and I have to say I am impressed with the results. Before And after Didn't take much work at all really. Sent from my iPhone using hammer and chisel! 4 Quote
Andy_Muxlow Posted July 9, 2016 Posted July 9, 2016 Bought these from jon@emperor tuning on Friday had the damaged lens repaired, got it back this morning and applied a light smoke to them. Will fit them later weather permitting... Sent from my iPhone using hammer and chisel! 1 Quote
Andy_Muxlow Posted July 9, 2016 Posted July 9, 2016 (edited) And on the car now. 😎 Sent from my iPhone using hammer and chisel! Edited July 9, 2016 by Andy_Muxlow Quote
Andy_Muxlow Posted July 9, 2016 Posted July 9, 2016 Good job there mate Cheers mark 🙂 Sent from my iPad using a hammer and chisel... Quote
kayjay0_7 Posted July 12, 2016 Posted July 12, 2016 Fitted new badges today and test fitted the window louvres from Chris at Tarmac 3 Quote
carts60 Posted July 12, 2016 Posted July 12, 2016 I gutted the rear of the car at the weekend and fitted a whole load of dynamat to reduce the road noise. Much improved. 1 Quote
Brimstoneboy Posted July 19, 2016 Posted July 19, 2016 So Chris at Tarmac Sportz sorted me some goodies after work monday so took a day off to play with car bits i painted my louvers mock up on car still need to flat n polish em and between coats i fitted these Big thank you to Chris sorry i intrupted your BBQ . 4 Quote
Humpy Posted July 19, 2016 Posted July 19, 2016 Coming along nicely mate, car is looking good 1 Quote
Brimstoneboy Posted July 19, 2016 Posted July 19, 2016 Cheers guys 😀👠Sent from my iPhone using Tapatalk Quote
Andy_Muxlow Posted July 20, 2016 Posted July 20, 2016 Looking good buddy I like the mk2 escort as well is that yours as well? 🙂 Sent from my iPhone using hammer and chisel! 1 Quote
buster Posted July 20, 2016 Posted July 20, 2016 Fitted new badges today and test fitted the window louvres from Chris at Tarmac hate to tell you but the rear badge is up side down 2 Quote
Brimstoneboy Posted July 20, 2016 Posted July 20, 2016 Nah Andy it's my mates , was down at his unit he was working on his Mexico while I nabbed his tools and picked his brains 😀 Sent from my iPhone using Tapatalk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.