billdingo Posted March 26, 2016 Posted March 26, 2016 Was actually done yesterday, but finally wired in the reversing camera I fitted months ago Quote
Tickettone Posted March 28, 2016 Posted March 28, 2016 Fitted my new gear knob the other day. Feels way better than the OEM one. Sent from my iPhone using Tapatalk Quote
Stan Posted April 2, 2016 Posted April 2, 2016 (edited) Fitted a nice aftermarket gearknob and gaiter as well Not as hard as I thought it would be, hardest part was finding the shaft of the knob (!!!) to hold - it had some plastic thing around it that I had to break off. Also installed my D1 spec throttle controller thanks to a very helpful how-to guide on here. Edited April 2, 2016 by Stan Quote
Stan Posted April 2, 2016 Posted April 2, 2016 Ebay, but from the states. The seller is 'ukwholesellar' but that particular knob isn't on there at the mo. Still, if it crops up again, they are pretty good and quick with shipping Quote
Tickettone Posted April 3, 2016 Posted April 3, 2016 Ebay, but from the states. The seller is 'ukwholesellar' but that particular knob isn't on there at the mo. Still, if it crops up again, they are pretty good and quick with shipping That's who I got mine from Quote
Stan Posted April 3, 2016 Posted April 3, 2016 Ebay, but from the states. The seller is 'ukwholesellar' but that particular knob isn't on there at the mo. Still, if it crops up again, they are pretty good and quick with shipping That's who I got mine from Thought it looked pretty similar! Did you have issue threading the retaining nut on under the gaiter? Cos mine only went on a coulple of turns, so I just left it off Quote
Tickettone Posted April 3, 2016 Posted April 3, 2016 Ebay, but from the states. The seller is 'ukwholesellar' but that particular knob isn't on there at the mo. Still, if it crops up again, they are pretty good and quick with shipping That's who I got mine from Thought it looked pretty similar! Did you have issue threading the retaining nut on under the gaiter? Cos mine only went on a coulple of turns, so I just left it off No only issue really was the thread adjuster wouldn't go completely flush with the gear knob. So therefore when screwing it on it would sit straight to car so had to then fiddle with the thread size adjuster so it was slightly more out about a quarter turn so it positioned correctly. I then used some old water hose under gaiter to stop the gaiter boot falling all the way down as I didn't want to much shift lever to be on shown. Quote
Tickettone Posted April 3, 2016 Posted April 3, 2016 Ebay, but from the states. The seller is 'ukwholesellar' but that particular knob isn't on there at the mo. Still, if it crops up again, they are pretty good and quick with shipping That's who I got mine from Thought it looked pretty similar! Did you have issue threading the retaining nut on under the gaiter? Cos mine only went on a coulple of turns, so I just left it off No only issue really was the thread adjuster wouldn't go completely flush with the gear knob. So therefore when screwing it on it would sit straight to car so had to then fiddle with the thread size adjuster so it was slightly more out about a quarter turn so it positioned correctly. I then used some old water hose under gaiter to stop the gaiter boot falling all the way down as I didn't want to much shift lever to be on shown. Quote
ZEUS Posted April 23, 2016 Posted April 23, 2016 Fitted G35 rear spats today, really hard to photograph on a black car! 5 Quote
RavenDW Posted April 26, 2016 Posted April 26, 2016 (edited) Forgot to add this a little while ago. Fitted the steering controls and facia. I had to cut and file it down so it isn't perfectly even, but it looks way better than the half inch gap it had before. https://imgur.com/kMYSpfT The dash needs some seeing too (mostly because of previous owners). Also managed to bodge fix the plastic clip at the top that somebody had managed to thug and break. It actually sits flush at the top now. Sent from my LG-H815 using Tapatalk Edited April 26, 2016 by RavenDW Quote
samsniss350z Posted April 29, 2016 Posted April 29, 2016 Today has been a busy Zed day as I've fitted a Y pipe back exhaust, 3 new wiper blades and a pair of front tyres. If the weather looks good tomorrow then its a damn good wash, clay bar, polish and a wax and sunday will be a day of rest or more than likely me and a mate will go for a bit of a tear up on some very quiet twisty's we know. Quote
Bigjimg Posted May 5, 2016 Posted May 5, 2016 These arrived today, will spend about 5 minutes fitting them , ultra quick mod! Big Thanks to Terry for supplying them. 1 Quote
kayjay0_7 Posted May 5, 2016 Posted May 5, 2016 Fitted a double din head unit yesterday Collected and fitted GT4 alloys today And the postman delivered a pair of front mats 2 Quote
MrChow Posted May 5, 2016 Posted May 5, 2016 Not really a mod just yet, but started to prep my new Stillen louvers with a few coats of plastic primer (thanks ZEUS) 2 Quote
Andy_Muxlow Posted May 5, 2016 Posted May 5, 2016 I have just started as only owned mine for a couple of weeks but I have changed my interior lights to led and my number plate lights also to led. Sent from my iPhone using Tapatalk Quote
valy Posted May 5, 2016 Posted May 5, 2016 These arrived today, will spend about 5 minutes fitting them , ultra quick mod! Big Thanks to Terry for supplying them. nice,where did you get them from? Quote
russyb Posted May 5, 2016 Posted May 5, 2016 These arrived today, will spend about 5 minutes fitting them , ultra quick mod! Big Thanks to Terry for supplying them. nice,where did you get them from? As above interested also 1 Quote
MUFU Posted May 5, 2016 Posted May 5, 2016 http://www.tarmacsportz.co.uk/GB/350z_03-06_Weapon_R_Dragon_Intake/350z-804-123-101_.aspx Just ordered this from Chris at Tarmacsportz ... I'll post pics when it's fitted ....it's a thing of beauty í ½í¸œ Quote
Stan Posted May 7, 2016 Posted May 7, 2016 These arrived today, will spend about 5 minutes fitting them , ultra quick mod! Big Thanks to Terry for supplying them. nice,where did you get them from? As above interested also Me too! They are lush! Quote
Stan Posted May 7, 2016 Posted May 7, 2016 http://www.tarmacsportz.co.uk/GB/350z_03-06_Weapon_R_Dragon_Intake/350z-804-123-101_.aspx Just ordered this from Chris at Tarmacsportz ... I'll post pics when it's fitted ....it's a thing of beauty ������ That looks vicious! Shame I already have a popcharger otherwise I would be tempted Quote
Apoc124 Posted May 7, 2016 Posted May 7, 2016 Minor mod for today, just a rear wiper delete which also fixed the boot release problem by removing the weight and motor on the hatch 2 birds one stone Just a shame i couldn't get the bung to match the paint 1 Quote
Bigjimg Posted May 7, 2016 Posted May 7, 2016 These arrived today, will spend about 5 minutes fitting them , ultra quick mod! Big Thanks to Terry for supplying them. nice,where did you get them from? Got them from http://www.zeetoyz.com/350zengine.htm 1 Quote
MikeyM Posted May 7, 2016 Posted May 7, 2016 (edited) These arrived today, will spend about 5 minutes fitting them , ultra quick mod! Big Thanks to Terry for supplying them. nice,where did you get them from? Got them from http://www.zeetoyz.com/350zengine.htm There is a discount via a group buy titled Fluid Cap Sets if you go have a look 😆 Edited May 7, 2016 by MikeyM 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.