Maccaman Posted March 18, 2010 Posted March 18, 2010 Hi Matt & to the forum. Will be very interested to see your progress with this. Quote
Ian Posted March 18, 2010 Posted March 18, 2010 Hi everyone. We are a tuning company down in Wilts and have been tasked with tuning a customers 350Z to around the 800-1000bhp mark. The engine as it is has been fitted with the APS twin turbo kit (installed and tuned by another company), and recenetly failed on the road (big ends due to low oil of all things!) and was running around 550bhp. We are aiming for as above quite high BHP figures. Does anyone have any specific information as to reccomended components, alterations etc. We build alot of high power subarus and map our own management systems so we know the obvious, just not specific to this vehicle. I am thinking liners and closing the deck, but I am sure theres a lot more to consider so any info much appreciated. I will of course post lots of info and images of the build on here Thanks, Matt @ M-Tech Hi Matt, very exciting times ahead with this build As mentioned already my350z.com is a very good resource on high powered forged engined zed. You should have a word with the guys at GT motosports who are well known and even make their highly rated stuff and have their own turnkey power packages http://www.gtmotorsports.com Good luck with the build and keep us posted Don't go to GTM, if you are going to ask anyone about building an engine then speak to Forged Quote
mtechautomotive Posted March 18, 2010 Author Posted March 18, 2010 I think the route we are going to take is to sleeve/line the current block and rebuild from there. A built engine is definatekly something to consider.... GTM, bad rep or? Quote
IanS16 Posted March 18, 2010 Posted March 18, 2010 A built engine is definatekly something to consider err.. 900bhp, YA THINK Only joking, to the club Quote
GT4 Zed Posted March 18, 2010 Posted March 18, 2010 Don't go to GTM, if you are going to ask anyone about building an engine then speak to Forged Not subtle Ian lol +1 Hi Ian, If there is something you know about them then i think we ought to know as i only heard good about them, have talked/dealt with them and even about to order some bits and bobs from them so it will be nice to share rather than make such a strong statement and Quote
rtbiscuit Posted March 18, 2010 Posted March 18, 2010 adam at Z1 auto in the states is a good source of parts for something like this. Quote
Tarmac@TarmacSportz Posted March 18, 2010 Posted March 18, 2010 Wow, can't wait to see how you get on Welcome to the forum bud. Quote
mtechautomotive Posted March 18, 2010 Author Posted March 18, 2010 Cheers for the warm welcomes guys, its definately a fun project to be involved with! We have a DD rolling road that can take 1800bhp so will be good to finally TEST it lol the most we have had so far is around 600ish skyline mapping etc. Fun times Matt Quote
djtimo Posted March 30, 2010 Posted March 30, 2010 Just a little tip mate, do not sleave the block. 90% of street driven cars with sleaves dont last long. Tons of over heating problems and Headgasket probems due to the sleaves moving. injected performance did 917WHP on the stock sleaves so don't worrie. Quote
mtechautomotive Posted April 15, 2010 Author Posted April 15, 2010 Just an update, We are now taking on Jun's 4WD 350Z. The chap is wanting to run a similar AWD setup with the attitude of 'if its not over 1,000bhp then don't bother' Crazy I know, but we love it Now we start sourcing parts... Matt Quote
IanS16 Posted April 15, 2010 Posted April 15, 2010 Just an update, We are now taking on Jun's 4WD 350Z. The chap is wanting to run a similar AWD setup with the attitude of 'if its not over 1,000bhp then don't bother' Crazy I know, but we love it Now we start sourcing parts... Matt nice one Quote
Glenn1981 Posted April 15, 2010 Posted April 15, 2010 this will be mental! I wish I had the kind of money this guy probably has to throw at toys! Is this going to need a different engine for that kind of build, or are we just talking full forged everything? Quote
mtechautomotive Posted April 15, 2010 Author Posted April 15, 2010 Talking a fully forged stroked motor. 1,000whp isnt easy, but we can do it Rotated turbos as well to fit the running gear in Money is no object to this chap, and he smply wants the best... Matt Quote
AjRED Posted July 5, 2010 Posted July 5, 2010 This looks like a very interesting project! Going to be very interested to see the 4wd set up :O What is the weak link in the 350z engine? Also what sort of compression ratio are you going to be running with this setup? Good luck with the build Quote
tez162003 Posted July 5, 2010 Posted July 5, 2010 http://www.importpartspro.com/st4vqloblni2.html Quote
The Chubby Ninja Posted December 7, 2012 Posted December 7, 2012 just found this thread scrapping the depths of the forum. Whtever happend to this build? Quote
RobPhoboS Posted December 7, 2012 Posted December 7, 2012 Well.. it's resurfaced now, so what happened to the motor ? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.