Jump to content

GT4 Zed

Members
  • Posts

    3,745
  • Joined

  • Last visited

Everything posted by GT4 Zed

  1. Hi guys, I'm back from the Ring today and will update the items for sale properly tomorrow with pics. Cheers Paul for holding the fortðŸ‘ðŸ‘
  2. Dunks, I'll see you tonight on my way from the Ring. There are 2options available and I'll discuss it with you. I'll call you when I touch down in Dover. Cheers.
  3. Nice work David. Coming on nicely. Lots of nice touches.
  4. Hey Tim/Ray, why would I joke about this😜. I've got the forged engine form Keydets old car which I was going to sort out and put into Paul Ts supercharged zed but he's got so much going on atm so it is up for sale as is or fully rebuilt. It's a complete long block. It needs 2 new cosworth pistons and a full gasket kit and it's good to go. However I will get all the clearances checked new ACL bearings and new rev up oil pump as that's the way to do it right. The pistons are 11.0:1 compression ratio but I can source wise I 8.8:1 or 9.5:1 if you want extra margin of safety from det. TBH 11.0:1 will be ok for a sc set up and the lower CR for a turbo. Get in touch if interested.
  5. I've got a forged engine for sale if you are interested. Cheers.
  6. If you are not in a hurry I would have a very good car for sale later next month. It's 50k miles on a late 2003 and full UK GT spec car. The car was an ex show car with a correct supercharger and many extras but it's been fully brought to OEM completely including a new low mileage engine, full respray to a Nissan color of the buyers choice. The undercarriage was fully stripped by the previous owner and powder coated so it's rust free. I have carefully source all the best OEM parts that needed swapping back from aftermarket parts so it will be like a time capsule. There are extra like an HR bonnet thrown in and a gloss black roof to make it stand out. Send pm if contacted but once it's ready it will be on here fs and Ebay/AT/PH etc.
  7. Happy birthday bobðŸ°ðŸ¾ðŸŽ‚✨
  8. That's really good news mate! So happy for youðŸ‘
  9. Damn Tim! You've done it againðŸ‘
  10. Damn you Macca for putting my mug on here!! When did you take all the pics sneaky!!! So glad for you and well deserved for all the @*!# you had to go through mate. Good deal on that controller. Tein have always been helpful. I'll have some lockout bolts for you shortly👀. My phone is sorted now so will call you later. Cheers.
  11. We've got the best fitment and construction Anuse front bumper by shine auto for sale. Check out the beetch project in member traders section.
  12. ðŸ¾ðŸ¾ðŸ°ðŸŽ‚✨ HBDTY!
  13. My inbox has now been emptied so I can recieved pm's now. I've got loads of pics now and should be able to get them up after work tonight.
  14. Hey Chris thanks for all your input! I have to raise my hat to you and say this you are a mad man but you have earned my respect. I had no diagrams and had to follow every wire, splice connector etc before I could make sense of it all. It is a major achievement how all that was working beneath the surfaceðŸ‘ðŸ‘. I felt so sorry when I saw the bitch in this garage and she had not been looked after right but not deliberately. The previous owner did spend money try to get her going but he wasn't the kind of car guy like you and me who can look after such an temperamental asset. I told you to sell me told wheels back in the day and that's what I bought the car for😉. I'll give you a shout if any hiccups or guidance etc. @forum: I'm working through the list setting prices and the pm list so I get the dibs correctly. Be patient. Just been from a night shift so it my take a while. Please in the case someone wanted everything together it will be considered first before splitting. Cheers.
  15. You mean keep right and indicate right to let faster cars know you are staying right or slower 😉
  16. You are wrong there. The bitch was dead until we rescued this project. There has been lots of talk from many quarters here about it but no commitment. There is nothing easy about stripping her and it's the only way it would survive. On paper it looks like a bargain but the car was it particularly well kept and lots of parts will need refurbishing. A lot of the installations were hardwired or spliced into thousand pieces that will render a lot of the parts useless. The bitch will live on in many other zeds and that's a good thing. Long live the bitch.
  17. Hi guys. As some of you already know and some have probably guessed. Myself and Paul decided to buy the Bitch - Keyser's old car. The plan when we bought it wasn't really set in stone but we knew there were some parts on the car that we both wanted and secondly we thought it was a shame that such an iconic car was lying unloved and not doing what it was meant to do. After 2 weeks of inspecting and stripping some parts off the car I have found a nice rust free underside and we have decided to put the car back to OEM and have it freshly painted to give a new owner the chance of a getting a really nice car. We decided therefore to fully strip the car off all the non-OEM parts to offer to the forum, Ebay etc to fund the rebirth of the car. The option of restoring the car back to her former glory was not feasible as the cost of rebuilding the blown engine and making the car more neutral so as to attract a bigger market made it uneconomical. The task of restoring the car has not been easy as there are many custom connections and technical challenges but eventually we are almost there. As for the blown engine, we are rebuilding it and swapping it for Paul's 50,000 mile one. Coincidentally the mileage reads circa50,000 on both cars which is handy. Looks like it was written in the stars. I'm almost certain the car ran low on oil and spun a bearing we ceased the engine. Initial inspection and strip is promising as there oil pan is free of debris and mayonnaise. The cylinders and pistons tops look in good nick. The block external looks intact. We will get full diagnostics when it will be fully stripped down. The plan is to use the ported heads and cans but rebuilt using 9.5:1 compression forged pistons to suit Pauls needs. We are aiming for 550whp. A list of parts that are available is included below and I'll add prices shortly once everything has been thoroughly inspected and or refurbished from the car to make sure we're happy to sell them. Everything will have a good description of condition. Because we are restoring the car I would be requiring OEM parts for swap. If you do not have or want to swap it is not an issue. I will adjust the price to reflect this. List. Bolt on Supercharger kit 600cc Injectors Vortech V3 Supercharger FMIC AAM Stage 1 Fuel Return system with fuel rails Modified fuel bucket Walbro 255 fuel pump Uprev GT MAF Sensor Additional Engine parts Setrab 19 row thermostatic oil cooler kit Wizards of NOS 75 shot system with NOS control unit and 2 x 5lbs NOS bottles with heaters AMS Pulley x1 Nismo thermostat Spill's grounding kit APS Strut brace and APS tall boy plenum Rare JDM harness cover modified Samco green coolant hoses Z-Speed engine under tray Haltech platinum pro ECU Transmission Quick Shifter with nismo gear knob Torque Solutions gearbox mount Kaaz 1.5-2way LSD in diff housing Suspension and Brakes Ksport 6 pot 330mm rear BBK with braided lines pads and discs with +70% life Ksport 8pot 356mm front BBK with lines, pads and disc with +70% life left (They will be powder-coated to buyers choice). Tein Flex suspension with EDFC NISMO Front and Rear ARB's SuperPro bushes on front and rear arms and knuckles Eibach adjustable rear camber arms GTSPEC front fender braces Interior Custom built centre console with 6 gauges Pioneer head Unit with BT/SAT NAV AEM Wide Band gauges AEM Fuel pressure gauge Saga Oil Temp gauge Saga Oil Pressure gauge Saga Boost gauge Nismo throttle pedal* Rising sun roof lining Exterior Shine Amuse Front Bumper with Carbon fibre vent - damaged but repairable* Carbon Fiber A Pillars Carbon Fiber Mirror Covers Carbon Fiber B pillars Nismo Version 2 rear wing* Nismo LED rear lights Nismo USDM Side skirts* Espirit rear bumper The items with asterisks have been spoken for but until I get cash dibs are in order. I will update this tomorrow with pics and prices and other parts I've missed. Thanks
  18. Can you post up that pic please Graham😉😉! I would be interested in the red one if its not gone and repairable. Can you courier? Ill pay of course.
  19. Agree with you there GM. Never had to disable it. Switching it off is enough and i almost never get it to interrupt or auto brake on track And i think you me you want to disable TC as ABS is useful.
  20. Welldone Sam! You will not regret it!!!!
  21. Alex you are a legend😎 What a way to spend easterðŸ‘
  22. Man you dont cease to amaze me how you get things clean and proper before going on your car! I just used a rag with white spirit and degreasant to get off road grime and oil then got the bushes in and straight on the car. Still waiting for you to get back about the kaaz or BBK👀
  23. 😎😎😎😎. You've got nuts and good taste my friendðŸ‘
×
×
  • Create New...