ZMANALEX

PM received and replied to Dan: Alex.

I also have them for the Skyline 350GT as I am dismantling a complete car. (Skyline 350GT) Alex.

Plenty in stock for 350 facelift and pre facelift. You will find them in my sub forum: http://www.350z-uk.com/forum/137-zmanalex/ If you require direct links then just let me know. Alex.

In stock and good to go same/next day. Alex.

If Payco does not have what you require then I have plenty preowned UK and JDM OEM intake pipes in stock and all good to go same/next day. Regards, Alex.

The Eibach spacers are different for the 350/370. In stock and good to go same next day if required. Alex,

Prefacelift motorised retractable cubbys are in stock and good to go same/next day. Just drop me a PM if I can help you further mate. Alex.

This is what you require. http://www.350z-uk.com/topic/54906-undertray-clipnut-and-bolt-fixing-kit/ Plenty in stock so just drop me a PM if you want some shipped out: Alex.

Here you go mate: http://www.350z-uk.com/topic/66420-350z-engine-oil-service-kit-4695/ http://www.350z-uk.com/topic/54921-oil-filter-and-crush-washer-genuine-nissan/ The new part number is 15208 - 9F60A Alex.

Rob, Here is the link to my 10 page sub forum where you will find loads of stuff: http://www.350z-uk.com/forum/137-zmanalex/ And here is the link to the O2 simulators (spacers) http://www.350z-uk.com/topic/23011-o2-simulatorslamda-spacers-to-fix-cel-dash-light/ Plenty in stock: Alex.

Andy, Providing the wiring harness is compatible then all you should require is a set of switches for the centre console. Alex.

Glad to hear that you are well happy Will. The transformation to the gear change using the proper fluids and the DC molyslip is very noticable and makes the 350 a real pleasure to drive. Alex.

£320.00 is excessive for a P2. However it looks like they are looking after you regarding the other issues so guess that it is a bit of a trade off. Alex

I have brand new in stock @ £80.00 + £5.95 courier shipping with tracking and insurance: Only one left in stock at the moment: Good to go same/next day. Alex.

Suck 90% of it out from the reservoir with a small syringe and then refill with fresh. Alex

CL-8 CLUTCH FLUID CLUTCH FLUID PFP:00017 Bleeding ACS0014Z CAUTION: Monitor fluid level in the reservoir tank to make sure it does not empty. Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area with water. Bleed the operating cylinder. 1. Fill the master cylinder reservoir tank with new clutch fluid. 2. Connect a transparent vinyl hose to the air bleeder. 3. Depress the clutch pedal quickly and fully a few times and hold it. 4. With clutch pedal depressed, open air bleeder. 5. Close air bleeder. 6. Release clutch pedal and wait for 5 seconds. 7. Repeat steps 3 to 6 until no bubbles can be observed in the brake fluid. Air bleeder: : 5.9 - 9.8 N·m (0.61 - 0.99 kg-m, 53 - 86 in-lb) SCIA1496E

Vlad, I have a hard copy of the procedure for changing the clutch fluid and proper bleed procedures. I will scan over and post up when I have a minute, however I will include a copy with your fluids and service stuff. Regards, Alex.

Thank you SMD: Payco: All service items in stock including Denso Iridium plugs for only £49.95. Great choice of fluids and filters etc. Genuine products at a huge saving over dealer prices. Just drop me a PM if I can help you further: Alex.

Nice one DoogyRev: All parts: bushes, ball joints, drop links and arms etc. are in stock and good to go same/next day. Just drop me a PM if I can help you further. Alex.

I used to believe that the chains were good for high mileage, however in the past couple of weeks I have heard of 2 examples where the chains were stretched and had to be replaced. One was so stretched that one of the hydraulic tensioners was at the extent of its travel and looked like it was ready to drop out. The motor was noisy and the timing was fluctuating causing all sorts of intermittent issues. I believe that Nissan have improved the tensioner/slipper guides and the old style have now been superseded. However I still believe that with the chains, you do not have a problem until you have a problem. Alex.

The answer to your question is circa 10K upwards. An early car with a supercharger without a build is what you would get for circa 10K Prices will vary considerably, all depends if charged or turbo'd and if the motor has been built. Alex.

PM received and replied to; Alex

Happy to hear that you are sorted. Your front camber is still out so expect a bit of premature tyre wear. Alex.

Check the pads and fixings Phil, also check for free play on the hub mate. When there check that the back plate is not touching the brake rotor. Alex.

As Kaizer has said something far wrong with those numbers. Best to take the car to a specialist for a proper 4 wheel alignment check and adjust and make sure that you get a proper print out. The garage that fitted the bushes should have reset the geometry after replacing the worn parts. Expect to pay up to £100.00 for a proper 4 wheel alignment check and adjust, however if the bushes have been fitted wrong then they will not be able to correct the front castor it the numbers are out with the manufacturers specifications, so it would mean a trip back to the guys that fitted the bushes. Alex.