ZMANALEX

In stock, just drop me a pm if I can help further.

Sorry, but I thought that your car was a 350. Best to check on the Tein website for clarity.

Tein are 17/14mm Just fitted a set yesterday to a customer's car.

Best to just go for Tein lowering springs. Decent ride and sensible drop. 17mm & 14mm Job done

HR DE revup 2006-2007 296bhp also consumes more oil

If you have the cash then I would recommend going for the newer version the HR. Don't be fooled by the bulge on the bonnet as that was a very popular upgrade on the older/earlier DE cars. To be sure, just lift the bonnet and check that it has two air intake boxes. The early DE version and Revup only have the one.

This lot is now sold out. More kits on order with an eta of circa 26nd March. Post up here or drop me a PM if you wish to preorder. Thanks, Alex.

Because they are nice and shiny, compared to the used rusty OEM ones.

PM received and replied to:

PM received and replied to:

Only 2 now left in stock:

Indeed it does:

Glad to hear that you have sorted your misfire: Rocker Cover sets here:

2 SOLD, so only 3 now left in stock.

Correct, oil seals already fitted. You are replacing 3 x components in 1 go. The cam cover, the gaskets, and the oil seals.

Very easy to replace, just remove cam covers, fit new gaskets (supplied) and refit with new cover. Drilling and cutting are only required if you are replacing the 6 x oil seals. These cam covers come with the 6 new oil seals already fitted.

Sorry Adam, all sold I am afraid. Thank you for your inquiry though.

For sale, 1 pair of new VQ35DE Rocker/Cam Cover assemblies complete with gaskets and fixing bolts. Cure your oil leak from inside the cam cover to the spark plug aperture at a fraction of Nissan dealer prices. Nissan will charge you the following: 1 x Pair of Cam Covers: £602.80: 2 x cam Cover gaskets: £38.92 20 x cam cover fixing bolts: £183.12 Nissan Price Total of £824.84: My price: £250.00.00 shipped to your door: (Mainland UK) I only have 5 sets in stock at the minute. Drop me a PM or post your inquiry up here on the open forum.

Your fluid will be fine, go with your garage recommendations:

Initial post now updated with wheel sizes:

Without a code you are guessing I am afraid. Plugs, coils, cam position sensor, injector, etc etc. are stuff that I would be looking at. Perhaps might be a plan to let it develop until it stores a code.

Are you sure that it is the EML that is flashing and not the traction/anti skid?

In stock and good to gom same/next day. Do you require the fixing hooks and nuts as well? Also UK car or JDM? Just drop me a PM if I can help further.

to the forum.

You have created a double post mate: An uprev tune should fix your issue.