Redsky

I copied these from the spring rates question in the suspension sub thread. Originally posted by @Docwra. Standard is 5.4kg/mm front and 6.1 rear on a 2004, from 04 onwards the rears went to 7.6. Nismo S-tune are 8.1 and 8.9 respectively. The convertible was 427lb if that helps at all ....... BC's are 10/8 HSD Monopros are 14/7 HSD Dualtechs are 12/11 Meister R (dual) 10/8 Meister R (single) 10/5 Tein Street 9/9 Ohlins NIS 10/7 Cusco 10/7 HKS Hipermax III 9/9 Apexi N1 10/8 Tanabe Sustec 10/8 Megan Track 12/10

My advice from buying my car is check the rear arches for rust, try and get a good look under the car and look for a big structural brace called a W brace as they tend to rust away into nothing. Make sure the car is happily idleing and check for oil pressure and have a good feel of the brakes and clutch make sure nothing is spongey or loose. You can use the UK government website to check MOT history (if you didnt already know) and try to talk to the owner a bit about the car. Some people buy the 350 because its "sporty" other people buy it because they love the specific car or the japanese cars. You can normally get a feeling about how the person cared for the car by the way they talk about it, see if they are interested in it, ask them the good and bad points of owning the car. just get them to open up about anything they might have done while they owned the car and get a good clear picture. In all honesty you could find something with 25K miles thats been thrashed every day of its life and it buggered where as you could find something over 100K thats been meticulously cared for and looked after. My 350 looked great on paper and in person until 3 days later the slave cylinder went pop....and I found out my W brace was held together by hopes and dreams. But you know no point getting annoyed about something thats happened years ago xD. What ever you end up buying I hope its everything you think it will be They are amazingly fun cars, just be prepared for the fuel bill xD.

Possibly a clutch release bearing? I'm not a mechanic by any means but that could make sense as it speeds up with RPM but goes away when the clutch is disengaged. Again not a mechanic and im sure someone far more knowledgeable will come along but just thought I would give you my two cents.

Thats a big old lump of torque you have now xD and quite a nice curve too

Its still got a Vette back end (Maybe a little camaro esque) but the front sort of looks like a ferrari 360 but in the style of the 458. I kind of like it but at the same time I absolutely love the front engined look with the landing strip of a bonnet.

If you really want to talk about the oil consumption make a point of it being common on a lot of that generation engine and that if your calculations are correct it actually burns less oil than nissan deem acceptable as others have said above. I went looking for my 350Z in march 2017 and a lot of the cars I was looking at had been waiting for months to sell, some had issues and some were just in awkward places. I actually bought my car a couple of miles from hayling island and the owner who sold it to me said he had so little interest as he was pretty far from anything major and it seemed to put people off. You can be open and honest but try not to make things sound like a big issue, if you highlight things it tends to ring alarm bells in peoples minds. You could for example put in an ad "The car idles at 700 RPM" perfectly normal but someone then asks why was that put in the ad, why is it important. But good luck with the sale from the sounds of it someone is going to be very happy when they get their well looked after zed.

I would speak to @ZMANALEX he helped me out with en exhaust before and has helped tons of other members. The rear chassis strengthening bar is also known as a W brace and you can find a bunch of after market alternatives to the OEM one that other members will say do the job just as well and dont cost as much :). Hope that helps.

So i checked, brake lights all come on, fluid reservoir is full. Let my car idle on the drive for 10 minutes no isses, went for a short drive no issues or lights. I'm kind of at a loss for whats gone on, I guess its something will have to keep an eye on. Thank you for your help though guys, its appreciated

All of my brake lights come on pressing the pedal.

Earlier today I was using a 12v socket pump which randomly stopped working, I assumed it was the pump burning out or breaking but a few minutes ago I went for a drive, the first one since the pump went and about 100 feet down the road my esc, slip and abs lights all came on at once. I stopped and noticed an odd noise so I turned the car off and took the key out but the noise carried on. From what I could tell the noise was coming from around the brake booster/fluid reserve area and only stopped once I took the battery terminal off. It was going for a couple of minutes as I had to sprint back to my house but when I got back there were no odd smells and no smoke. I have had a look around the forum and there are a couple of topics similar to this talking about checking sensors but I havent seen any that include the randomly running part. Any help anyone can give would be fantastic. For reference its an 07 HR with no kind of remap or engine mods.

My cousin just got his 1.2 2003 clio written off by a left hand drive lorry, im trying to convince him to go for one of the 182 clio's, he always wanted one and he did love his 1.2 to bits even if it was slow as anything xD. How has it been treating you so far?

I had P zero rears on my 350 when I got it, to be fair in the dry they were really grippy, probably helped that they were pretty worn so had a lot of contact but honestly it felt like if someone spilt a drink in front of my I would spin they were utterly horrendous in the wet. The P zero neros I had on a rented mustang in the US worked a fair bit better but again just felt unsure in the wet.

Its looking really good Makes me a bit self-conscious about my little jack and ramps i have...

I wonder at what point they will set the acoustic trap. I mean there are a lot of loud cars out there stock. Jack all they can do about an OEM car. Its just a load of bollocks in my opinion, I live under a flight path half a mile from a motorway and about 2 miles from a train station. If someone cant handle "Hundreds" of bikes driving up and down the road they should probably find a desert island somewhere to sit and mope in silence. Also ignoring the fact that "Hundreds" could mean 1 bike a day....

I do feel a bit sorry for him, probably got a brilliant finance deal got giddy and decided to sign it and run home and start these big grand plans. BMW aren't wrong at all he violated the contract and he is paying the price for it but I do get that sort of almost childish glee when something happens. I bought my very first car and within 2 days found out one of the coil springs was buggered and it needed all new brakes, but you get into that mindset of "This is amazing and fantastic I want to do it, screw it lets do it". But if anything hopefully he will learn from it, or hide it better next time. I imagine he would have had a very confused BMW tech at his yearly service.

It is really comfortable, went on a driving holiday around the west coast USA last year. drove from Reno to Seattle in one day 820 miles. No complaints from the seats at all. I also love how the heated seats can go super warm, drove along one of the highest roads in california around 9000 feet up, awesome to have the windows down and hear the engine in the mountains but still have a nice warm arse xD.

Search push pins or push rivets or push clips (no one seems to be able to decide on one name) thats what they tend to be called. Im not exactly sure of what size the 370Z uses but they are pretty cheap overall from what ive seen. This is what I found again still not 100% sure if this is right so someone please correct me if im wrong. https://www.amazon.com/Lantee-Push-Type-Retainer-01553-09241-Pathfinder/dp/B01LWRW7X5

Very nice indeed I like it a lot What sizes wheels have you stuck under your new arches?

This is actually pretty interesting, like our own little drama series xD. its going to turn out its actually his mistress who owns the other half of the car lol.

it is an old ebay account though joined in 2003 and a bunch of positive reviews and things, doesn't seem like the typical brand new 3 day old job. Like someone said above though could have been hijacked

12K for 29000 mile nismo spec. Why does that seem far too good to be true or have prices really gone wonky?

I could be wrong but wouldnt 50PSI be the limit of pressure? I think those wheels are supposed to be 40-45PSI. But if anyone knows any better please feel free to correct me.

Yeah probably but always worth a quick 10 second check to potentially save yourself a massive headache.

Just out of sheer paranoia from me was that picture of the volt and oil pressure gauge taken while the car was running or just on accessory? Because that needle is sat on no pressure at all. Only wanted to check since the picture before shows the car running.

I will just add when the weather is cold and the car is warming up the exhaust does drone but on warmer days or after a good run the drone lessens and around 3K RPM the drone stops pretty much entirely and starts to really shout on WOT.