Ewen@Clark Motorsport

Try dropping Alex a PM, I don't think he has black but could possibly help with other colours http://www.350z-uk.com/user/9648-zmanalex/

You would need to get the alignment setup once fitting the springs. With a 30mm drop you will more than likely will have excess negative camber which will give you a bit more inside tyre wear but as long as the front and rear toe are correctly adjusted it shouldn't be to bad

Very sad, he always seemed a really down to earth guy. I remember how proud he looked when Jenson won in 09

Yes no problem please do, we have a number of options in stock

Just to let you know we are on the Samsonas Motorsport and DBA stands for the next 4 days at the Autosport International Show in The Birmingham NEC, pop along to say hello if you are attending During this time we may take longer to respond to PM's and emails so please bear with us but phone calls will be answered as normal so if you are in a hurry for anything give us a call Ewen

Always worth changing, they are only £6.50. Competition Clutch's kits all come with a new replacement

If you're not after to much of a drop the Teins are a good bet, http://www.350z-uk.c...7350-delivered/ Drop me a PM if I can help

Far to much of that going on these days, you should report him to eBay. Not that its likely to do you any good!

Do you have proof of postage from the Post Office?

Ideal engines and gearboxes have changed their name dozens of times, if you look into their history they are one to avoid. With the price of replacement parts there is now way they could carry out a rebuild to the spec they mention and make any money. API have been around for years and seem to have a good reputation, or talk to someone like Abbey Motorsport

Thanks for the referral , we have them for £49.50 new. Drop me a PM if I can help

Welcome along

Welcome along

No worries

Thanks Will It can be found here http://www.clarkmotorsport.co.uk/parts/AT-Matic-J-Fluid-inc-N-CVT/1-litre/KE908-99932+1L Dry capacity is 10.3 Litres but you wont be able to drain all the old fluid out

We have them here http://www.clarkmotorsport.co.uk/parts/Boot-Mat--Coupe-only/KE840-ED081

Bosch or Exide would get my vote, Exide are made by Bosch. We have had a few Yuasa ones go back under warranty recently they don't seem to be as good as they used to be.

We stock the covers and gaskets, both can be found here http://www.clarkmotorsport.co.uk/website/webshop/productsSearch.asp?searchPartType=Panel&searchCategory=Engine+Part http://www.clarkmotorsport.co.uk/website/webshop/productsSearch.asp?searchPartType=Gasket&searchCategory=Engine+Part Ewen

No worries

Indeed its also advisable to change the seating cone which is £9.99 and the ball joint retaining nut at £5.09. All in stock.

We supply the genuine Nissan bush for £29.99 It can be found here http://www.clarkmotorsport.co.uk/parts/Compression-Rod-Bush/54570-AC70A

Did you not have any luck with your warranty then? We sell the excellent Competition Clutch lightweight flywheel http://www.clarkmotorsport.co.uk/parts/Single-Mass-Ultra-Lightweight-Flywheel/6.3-kgs/2-350Z-STU

I'll be there for the 4 days on the Samsonas Motorsport Stand, we also have staff on the Disc Brake Australia stand, come over and say hello

Welcome along

Thanks Tony, we have new lamps in stock they are £142.50 per lamp. Let me know If I can help