Ewen@Clark Motorsport

I'm looking for a bi-Xenon facelift headlamp from a 2006 onwards if anyone has?

I'm looking for a passenger side front twin pot non Brembo caliper from a JDM 350Z. If you have one please get in touch. I can arrange collection if you do not wish to post. If you have a pair that you don;t want to split I would also take. Many thanks

No problem its £811

No problem, the main benefits of switching from the dual mass setup to a lighter single mass flywheel are that its maintenance free with no moving parts and also a lot lighter allowing the engine to rev more freely. The Xtreme kit has a higher clamp load than the OEM clutch kit which means it can deal with more power, we have a number of FI cars running this setup with no issues. It retains a stock pedal feel so is ideal for everyday use. There will be an increase in gearbox idle chatter below 1500rpm but the benefits far out weigh this. We supply and support the full Xtreme range in the UK offering full back up support.

No offence taken The clamp load figures are on our thread in our trader section and on the Xtreme UK website but the flywheel weight is not, ill see if I can get that added.

I could have given you this information Clamp load is 1285kgs which equates to 615nm or 453 ft lb of torque. The flywheel weight is 7.2kgs and is optimised to reduce the chatter experienced with going from the dual mass to single mass flywheel.

Glad you are impressed Jack, we always have this kit in stock for next day delivery

Thanks Alex We have both kits in stock for next day delivery, very popular choice with many happy buyers. Is it a DE or HR that you have?

I can supply the DS1.11 pads for a good price, have you considered the DBA T2 or T3 discs?

That's like saying all tyres are the same because they are all made of rubber, the quality of the cast iron used is the main factor in what determines a good quality disc. The Brembo discs that ECP sell are good for general road use, we can supply these with the Hawk HPS pads and can normally beat the ECP price for the discs. We can currently supply the Hawk HPS pads for £85 for the front set.

The bushes can be replaced on the control arms which works out cheaper than replacing the whole arm, we keep Whiteline on the shelf. We have OEM droplinks and Whiteline adjustable ones as well, all for next day delivery

thank you for the heads up, I'm on a mega tight deadline and they car only gets used roughly once a month so not overly bothered by how loud it can be Thanks for the order its on its way to you

PM on its way

£179.99 delivered which we can do on a next day service

The Mishimoto is now plug and play, we have them on the shelf for next day delivery. If you wanted OEM I should have a working used setup.

We sold a good few sets of the Tein Street Basis now and the feedback has been very positive, if you are just looking for a replacement set of dampers to replace tired OEM dampers these represent really good value. The fact that they are manufactured by Tein means they are a quality product.

As Alex says its likely to be bleeding, very rare for a master cylinder to need replacing.

Drop me a PM and ill check in the morning Karl

Is the rear diff VLSD or non VLSD? If its non VLSD then it just takes a standard 80W 90 oil, if its VLSD then the Nissan oil we sell or equivalent is what you need. For the auto box you need the Nissan AT-Matic J Fluid which is £18 a liter, for a complete change you need 11 liters.

We keep the genuine oils in stock, £39.95 for gear oil and £25.36 for the diff oil

The dual mass flywheel is designed to dampen the extra noise so removing that is why you do get an increase. The Xtreme kits flywheel is optimised for weight to try and minimise this noise. The overall benefits far outweigh the noise

This is our most popular kit for the DE Adrian, many happy owners on this forum. Its ideal for everyday use while still being suitable for using on track. In stock for next day delivery http://www.350z-uk.com/topic/95545-new-xtreme-clutch-organic-inc-smf-350z-de/

You get what you pay for, there is a reason its that cheap

Got your email Greig and have replied. As Alex says avoid them they supply cheap Chinese knock offs, how they are still allowed to trade on Ebay I really don't know. Doing a search on their name says it all https://www.bing.com/search?q=techniclutch&PC=U316&FORM=CHROMN

That's correct yes, we can supply them if needed