RobPhoboS

Nice find, what kind of improvement would that bring for us though ?

Many thanks, it's something I'd like to do - but it would probably take me 24 hours if I attempted them myself Do you know what the lift\duration is on the standard cams, it's 240 iirc ?

I just wondered after popping these into an 04 car with the UpRev - I presume the car would need to be remapped again ? Lastly, is this something you can just pop in or does it require other bits to be done ? (just the cams I'm talking about btw)

Ok, so I'm thinking about doing a few chassis upgrades to my car (04 GT) over the next few months, first being bracing, then probably Tein S lowering springs, eibach ARB and finally some superpro bushes here and there. I'd rather do this one bit at a time so I can judge for myself how it's feeling, the car will go on track maybe 3-5x a year but mainly used for fun. Anyway, I just wondered what options we have when it comes to bracing ? I saw there was a 4 piece Summit Underbody Bracing Kit but I don't know if that's available anymore. I did have a quick look at Tarmac's site - and saw there are some bits: http://www.tarmacsportz.co.uk/products.aspx?CategoryId=1d5bec24-3eb0-4ed8-a67e-92f7d3825965 But I don't know what I'd need. Cheers for any help !

Where did you guys buy those chunky braided lines from ? and the coloured hoses ? Cheers

I've just had this lot fitted: EBC front & rear discs (standard ones) EBC Yellow stuff pads RBF600 brake fluid Hosetechnik braided brake lines (MPSS just slung on a week or two ago as well) I did the fronts a couple of weeks ago and followed ZMANALEX's bedding in procedure, I'll need to do it again this evening now that the rears are on as well... But the pedal at the top of travel still feels a bit too spongy to me. Braking is definitely a crap load better once your on them, and in fact I seem to be able to trigger the ABS very quickly which seems a bit odd (?). Any idea how to get a firmer feel to them ? Ah just spotted this thread: http://www.350z-uk.com/topic/71520-brake-pedal-feel/page__hl__spongy

I've just been out seeing how my new brakes are through some back roads... held the phone very stable, very good grip in the vent, doesn't feel like it would damage it at all (this is with the Breffo thing).

Excellent stuff. Any idea where I can get the 4-piece Summit Underbody Bracing Kit ?

http://www.euro-spec2000.co.uk/ I've been using these chaps on/off since 2003, they are local to me and I can definitely recommend them for any work you need doing. They've just fitted new discs, pads, lines, clutch line, break and clutch fluid, and oil change - so I'm off to get some heat cycles into the new discs EDIT: I've decided to use other recommended places now (Kaizer/Abbey/TGM). Some of the work was good, some of it wasn't (ex: crushed brake pipe). A couple of guys that work there are very competent though.

The Breffo Spiderpodium is great !

I got my one at H-Dev, fits underneath the brace no problem - you have some washers in the kit that give the extra space where it bolts to the car. If you've already done those other things, it only makes sense to help this part out as well - it's all breathing modifications after all...

Does it get triggered by the car being knocked, or only working when you are driving ?

It will help if you have the valves reseated and the head skimmed at the same time We just put an engine in that had the head skimmed valves reseated (no porting) block was honed and new rings - really noticeable power improvement the torque is back all the way up the power band. Just out of curiosity, as I personally would rather spend the money on chassis improvements to get the available power down properly BUT - how much off the top of your head does a job like that cost ? (ported/polished/valves etc etc)

Congratulations ! I'd opt for a Ferrari FF, or if on a budget a Scaglietti 612

I'm going to try that little spider thing, I NEED to see the screen, not just leave it somewhere random.

In all fairness, I'd do the same

...onation

How stable is that Breffo Spiderpodium ? I really need something in the car for phone sat nav/mp3's. The other thing I keep hearing about is a Brodit clip or something ?

What was the benefit of fitting this ? (apart from looking cool )

I can't at the moment but potentially next month or start of June, good idea

Something I see, even on some of the most popular car youtube channels that drives me freaking nuts... when they have the gopro in the car, they have the exposure set completely wrong - so that all you can see if it's sunny outside is the cabin, and the outside world nearly just white. Of course this is great if you just want to view someone's driving control but 99% of the time it's because they haven't set the exposure (there are some apps you can do this with now, or just set it to central spot metering, and ensure it's pointing outside properly )

Awesome thread mate I'm interested in some of the goodies you've put on your car as well, I'll only be doing about 3 or 4 track days a year but a couple of things I'd be keen to do. I think I'd do that gearbox mount when I have my clutch flywheel done, and potentially the shortshifter - however, I'm guessing the standard knob won't fit afterwards ?

Well since Dan didn't outline any specifics it's fair to assume he wants an everyday tyre. If they are good enough for mates with carrera gt's et al - then they are good enough ('best' all round imho) for those kind of cars, good enough for 350z At least nobody recommended Bridgestones, fooking awful things

There are about 10000 posts saying MPSS... So yeah, 4x MPSS Fresh set on my car now, feels great !