Aglii Posted June 14, 2011 Posted June 14, 2011 I was taking the engine out, and everything was fine, then came the day to replace the broken internals, and the garage had been ****ed up, bolts and everything disoragized, so basicly need tutorial, wiring diagram, technical infromation, and basicly everything i need to put it back togeather.. Running a nissan 350z 2003 base model, with vortech v2 supercharger kit and a few other mods Quote
choptop Posted June 14, 2011 Posted June 14, 2011 I was taking the engine out, and everything was fine, then came the day to replace the broken internals, and the garage had been **** up, bolts and everything disoragized, so basicly need tutorial, wiring diagram, technical infromation, and basicly everything i need to put it back togeather.. Running a nissan 350z 2003 base model, with vortech v2 supercharger kit and a few other mods . This could be a hard one with everything mixed up. Quote
martinmac Posted June 14, 2011 Posted June 14, 2011 Hi and welcome to the forum. That sounds like a bit of a nightmare. Where abouts are you. Quote
Aglii Posted June 14, 2011 Author Posted June 14, 2011 Hi and welcome to the forum. That sounds like a bit of a nightmare. Where abouts are you. Your best neighbour Iceland And yeah, true bit of a nightmare, good thing i hadent started disasseblying the engine alot Quote
Aglii Posted June 14, 2011 Author Posted June 14, 2011 And yes, forgot in all the mess, Hello to you everybody to! Good forum you have here Quote
Stew Posted June 14, 2011 Posted June 14, 2011 Sorry, can't give you any diagrams as there is an ash cloud stopping me from posting them..... and good luck! Quote
mattbowey Posted June 14, 2011 Posted June 14, 2011 Sorry, can't give you any diagrams as there is an ash cloud stopping me from posting them..... and good luck! Quote
Aglii Posted June 14, 2011 Author Posted June 14, 2011 Sorry, can't give you any diagrams as there is an ash cloud stopping me from posting them..... and good luck! Haha, was waiting for it Quote
Maccaman Posted June 14, 2011 Posted June 14, 2011 Hi & to the forum. Not a good situation, especially as your introduction. Hope everything goes back together with no problems. Quote
Husky Posted June 14, 2011 Posted June 14, 2011 Sorry, can't give you any diagrams as there is an ash cloud stopping me from posting them..... and good luck! low blow you need to download the workshop manual really. Quote
Keyser Posted June 14, 2011 Posted June 14, 2011 Hello and Welcome Got a 2006 service repair manual on CD may help, PM me your address I'll send you a copy. I'm also running a V2 vortech so may be able to look/photo things you need. Quote
bronzee Posted June 15, 2011 Posted June 15, 2011 Welcome to the forum. Hope it doesn't prove to be too much of a mission to put things back the way they should be. Quote
Sam Mcgoo Posted June 15, 2011 Posted June 15, 2011 Welcome to the club, hopefully we can help out a bit. I too am running the Vortech so give me a shout if I can be any help. May I ask the reason for the re-build? Did it let go in a big way? Have you found the reason for it? Quote
Ken Posted June 15, 2011 Posted June 15, 2011 Welcome to the forum hope you get it back together ok. Quote
rabbitstew Posted June 15, 2011 Posted June 15, 2011 Sounds like a nightmare. In the past when ive taken an engine out and stripped it down ive taken loads of photos and even video recorded it so i can see where everything goes afterwards if needed! Theres loads of decent guys on here, so hopefully between everyone we can get it all back together!!!! Quote
Darren-B Posted June 16, 2011 Posted June 16, 2011 I have a workshop manual on PDF, PM me your email & I`ll send it to you Welcome by the way Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.