Jump to content

Recommended Posts

Posted

Would just like to say thanks for adding the ARC extras to my car a week or two back, got to test the burnout mod today! Worked an absolute treat, thank you Mark!

 

  • Like 1
Posted (edited)

Ok I give in and will ask the dumb question...... what is the ARC mod?

 

You can get the ARC license added to your car that is running a Uprev tune. Meaning you can add extra features like Launch Control, Rolling Anti-lag, Flat foot shifting and Burn out mod.

 

Usually you would need a line lock to lock the front wheels while spinning the rears, the 'burnout mod' allows you to spin the rear wheels and lock the front wheels by holding the brake pedal down, without any need to add any hardware, it's all done through the ARC software.

Edited by ConnorW06
  • Like 1
Posted

The burn out mode is needed to allow you to hold the car on the brakes while giving the car throttle. Normally with a 350Z as soon as you touch the brake pedal it shuts the throttle down. ARC add on license allows you to remove this so allowing born outs to be carried out.

Posted

The burn out mode is needed to allow you to hold the car on the brakes while giving the car throttle. Normally with a 350Z as soon as you touch the brake pedal it shuts the throttle down. ARC add on license allows you to remove this so allowing born outs to be carried out.

So does it actually lock the front brakes or just disable the throttle cutout mark?

Also are the options available on the DE as the video I seen for the anti lag etc said it was just for the HR?

Posted (edited)

How much to get this added on!!!

 

I need this

 

Although as above good for de? Also does it lock front brakes or would it allow for left foot braking/ rolling burnout

Edited by StevoD
Posted

If touching the brake shuts down the throttle, how am I heel and toeing, on the brakes on downshifts into bends?

Might not apply when the clutch is disengaged?

Posted

ahahaha awesome! Coincidentally I saw the 370z love/hate thread and it got me thinking I would like the line lock feature so had just made the enquiry into options around getting this one for a 370z with an Ecutek!

Posted
Is this available for de? I'd love this to go with my turbo set up flat shifting would be awesome bonus too

 

 

Sent from my iPhone using Tapatalk

 

Ecu you on a pre 06 isn't big enough for the extra software

Posted
Is this available for de?

Ecu you on a pre 06 isn't big enough for the extra software

But on the 06/07 Rev Up DE it would work then?

 

Yeah I believe so as there is more storage on the ecu

Posted

If touching the brake shuts down the throttle, how am I heel and toeing, on the brakes on downshifts into bends?

 

Yeah, exactly. I brake in gear against the throttle and drive a few hundred yards to warm things up before sprints. Throttle doesn't die. Is there a rev point where it stops?

Posted

To confirm what the added BURN OUT mod upgrade with ARC License.

 

How to activate: Burnout Mod

 

Turning this feature ON results in the brake-throttle safety limiter being ignored. This will allow the throttle to open fully while pressing the brake pedal at the same time so that you can begin doing a burnout.

 

Seems the stock car enables a throttle opening limit when the brake pedal is pressed together with the throttle pedal , stock car will still enable you to toe and heel.

  • Like 1
Posted

Can this be put on a de then?

 

Is this available for de?

Ecu you on a pre 06 isn't big enough for the extra software

But on the 06/07 Rev Up DE it would work then?

 

Yeah I believe so as there is more storage on the ecu

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...