ZMANALEX

In stock and good to go same/next day. Just drop me a PM if I can help further.

All OEM Sat Nav OEM parts are in stock if you decide to go that route. Getting removed from a 2008 350Z HR at the weekend.

to the forum.

Yes, in stock mate. Just drop me a pm Ben with the year and model of your car, what side you require and if you also require the tweeters.

Straight swop Matt. However the wiring may be different if heated or not, but the electrical block connector is the same

to the forum. Fine looking 350 you have there:

That is a very straight forward Smart repair and hopefully it will polish out sufficiently enough for your eye not to be drawn to it.

PM received and replied to mate. In stock and good to go same/next day.

Is this the one that you are after?

Will do Ryan;

Facelift and prefacelift both easy to remove. However you do not require to remove the cubby to drill a hole and feed a cable through.

Pre-facelift interior Ryan I am afraid;

Mishimoto rads are NOT expensive and work reasonably well for road and fast road use, but not to good for track use. OEM is a very good radiator for road and track. Best to avoid cheap eBay tat. DE Coupe and DE Roadster rads are compatible with no fitment or performance issues.

Take it to a 350Z specialist for an informed diagnoses as it is only guesswork from where I am sat. All drive train parts are in stock if required.

It could be numerous things including cam/crank sensors etc. However an up rev tune may fix your issue,. Take it to a 350 specialist who can perform the uprev tune.

Received and replied to mate.

Better with a dead bee as a dead wasp can still sting you. Great idea though.

In stock at the minute but will require much more than beer money I am afraid, also shipping including P & P will be £40.00.

The part that you refer to is more of a bushing and is part of the casing and not a serviceable item I am afraid. As said before, I have a very low mileage preowned (23,000 miles) rear casing in stock complete with good bearings, bushings and seals. This is the way that I would go as the bearings/bushings are very tricky to remove and install even with specialist tools. I can let you have this for £100.00. If you wish to proceed with your order then just drop me a PM.. Alex.

The 370 R/H actuator would be £75.00. If you wish to proceed after you have spoken with Nissan then just drop me a PM confirming that what is in the image is what you require.

Yes that is the door lock assembly including the actuator. Ask the garage to provide you with a written itemised quotation which should include a breakdown of the labour charge and a list of the parts required including the part numbers. In my view that is most certainly not an unreasonable request, in fact, I would consider it mandatory. I certainly would not consider giving them authority to proceed with the repairs until you receive this, if you were to decide to get them to fix your issue.

I really require a bit more so that I supply you the correct part. Is it the actuator that has failed? Is the part that you require similar to this image?

Avoid Nissan for Diagnostics and repairs. I should have all the parts that you require in stock Just let me know what part/parts that you require. Also what side and what model of 350/370 you have. Hopefully another forum member will be along shortly with a recommendation of a suitable independent in your area.

Gary, You do not say if your car is an HR or a DE, however for pricing, the values are similar. There are 3 x bearings in the end casing and I am unsure which one you require. There are also numerous bushings and an oil seal that you may require. The bearings are priced at £50.94, £26.08, and £26.08 respectively and all are showing in stock. A complete new rear casing is £700.05 and is a 4-6 week order from japan. However, I have a very low mileage preowned (23,000 miles) rear casing in stock complete with good bearings, bushings and seals. This is the way that I would go as the bearings are very tricky to remove and install even with specialist tools. I can let you have this for £100.00. If you wish to proceed with your order then just drop me a PM.. Alex.

PM received and replied to: