ZMANALEX
-
Posts
14,760 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by ZMANALEX
-
I previously stated, more than likely the non return valve which sits in line just above the brake servo. The windscreen washer bottle which is on the driver's side sits behind the bumper and has two pumps, 1 for front and one for rear. The headlamp washer bottle also sits behind the bumper but is on the passenger's side and has only 1 pump. Alex.
-
At least a day to replace the headers with engine insitu
-
Welcome to the forum Steve Have a look at the links below. Drop me a pm if I can help you further or you can pm me over your number and I can give you a ring to talk you through the options. viewtopic.php?f=38&t=27436 viewtopic.php?f=38&t=31543 Cheers, Alex.
-
Hi and welcome to the forum
-
Newbie looking to buy
ZMANALEX replied to tommythewolfboy's topic in Introductions & Welcome Messages
Hi and welcome to the forum -
Preowned MAF sensors, front and rear o2 sensors all in stock for JDM and U.K models o2 simulators also in stock All available for same/next day shipping Just send me a pm if I can help you further. Cheers, Alex.
-
Hi and welcome to the forum.
-
The only cost effective method to fix this would be a quality repair from an Automobile Upholsterer. Unless you have 5k to burn on a new roof. Alex.
-
Hi and welcome to the forum.
-
Cleaned my Zed for the very last time...pic heavy.
ZMANALEX replied to JAMIE MOY's topic in 350Z General
I like that colour on your new Roadster Jamie. -
I use Innovate LM2. It reads UK and JDM Alex.
-
The PAS pump is driven by a belt off the crankshaft pulley. You have pm
-
Nice one Stew In stock and good to go same/next day. Cheers, Alex.
-
Nice one Dave, looking
-
Sam, CDO #2 is the later box and Nissan XZ Gear Oil SAE 75W-85 - API GL4+ is the stuff to go for. Alex.
-
Remove the two large bolts holding each calliper on and slip the callipers to the side and tie up. Slip off rotors to access the studs. You may have to let off the handbrake cable adjustment on the rear to get the rotors off as the handbrake shoes are within the rotor. Alex.
-
I have a preowned B & M short shifter coming off a Zed on Monday Drop me a pm if of any interest to you. Alex.
-
They will knock out very easily mate. Then all you have to do is feed the new ones in from the rear and pull into place using a wheel nut. Job done.
-
As the guys have previously said, certainly sounds like wheel bearing. In stock and good to go same/next day Please give me a shout if I can help you further. viewtopic.php?f=32&t=28625 Alex.
-
Hi and welcome to the forum Looking forward to your list of exotica
-
the one i listed was only £25, to get it painted wouldn't be more than £250 And the ones that I offered you were £50.00 delivered
-
Hi and welcome to the forum
-
Hi Mark and welcome to the forum
-
Help is on hand David. You have pm.