ZMANALEX

Weld it up

to the forum Craig. Good to see yet another Scottish based member: Alex:

Remember that you will have to extend the oil pick up pipe, so best to make sure that the spacer and bolt kit etc are included. Alex.

David, Preowned 350Z cats in stock and good to go same next day. New Miltek exhaust systems also in stock and good to go same/next day. All exhaust gaskets with fire ring also in stock with hardware fitting kits if required. Just drop me a pm if I can help you further. Alex.

Fresh oil will only help it there is an issue with your current oil or if the oil is low. The flat spots may be related to the VVT which is also chain driven and controled by the solenoids and sensors. Pull the VVT front covers and lock up the VVT and see if that makes any difference. Alex:

Definately sounds chain related. Please refer to my posts #3 and #11 Alex:

Those are the new style SPC Performance (Eibach) front correction arms: Much more user friendly than the old style: Alex:

Thank you Mike: Pm received and will reply shortly. All parts in stock and good to go same next day. Alex.

DE = Manual adjusting. HR = Self adjusting. Alex.

Nick:

Here you go: Link to PWM http://www.350z-uk.com/topic/41837-new-genuine-nissan-power-window-motors/ Link to sub-forum http://www.350z-uk.com/forum/137-zmanalex/ In stock and good to go same/next day. Just drop me a PM if I can help you further: Alex:

Nice one Jay, thank you: Pm received and replied to Seamy. In stock and good to go same/next day mate: Alex:

All parts now sourced, managed to get myself this morning a 2012 R35 GT-R cat C. Alex:

Thanks Mike: PM received and replied to Dave: In stock and good to go same/next day: Alex.

Looking good Chris, Cosworth discontinued the carbon end covers due to loose carbon fragments contaminating the engine oil and causing piston ring damage. Alex,

Craig, You will find V2 rear spoilers in plain or carbon in my sub forum: http://www.350z-uk.com/forum/137-zmanalex/page__prune_day__100__sort_by__Z-A__sort_key__last_post__topicfilter__all Alex:

Thanks for the referrals guys : PMs received and replied to Hannah. All parts are in stock and good to go same/next day. Alex

The VQ35DE motor tends to rattle for a few seconds on start up from cold. The rattle is usually from the timing chain area. In laymans' terms, the chain tensioners are hydraulic and the oil tends to drain from them overnight leaving the chains slightly loose. Once the motor is started the oil pressure activates the tensioner within a few seconds and the chains retighten. Alex

Viscosity mate.

Try a different engine oil. Alex.

If the pads are oem and still got plenty beef left on them you will probably get away with a deglaze and copper slip on the rear. Noise reduction anti squeel shims in stock and good to go same/next day if required. Alex.

Had a look, and unfortunately I only have fronts and R/H rear JDM non Brembo calipers. Try A1 Jap spares in Manchester,(trader on here) ask for Omar and tell him Alex sent you. Regards, Alex.

I have a box full of old JDM calipers that came from 350Z brake upgrades to Brembo. I will check this out for you over the weekend. If I have one suitable then it will be FREE, just pay the postage. Alex:

Happens to me most of the time. It appears to drop back to type size 8 by default. It looks okay when typing, however once sent it downsizes. I then have to edit to change the letter size. Alex.