GT04JAP

Hi, Sold my beloved 350z (GT04 JAP) about 3 weeks ago and upgraded to a GM 370 GT on a 60 plate. I loved my 350z and had a few modifications such as Revup map , full stainless with berks cats but I must say the 370z is a better car. The performance from the 370 is awesome and very noticeable, the interior is also a much better place to be with extras like the HDD sat navigation system. So even though I miss my 350 I don't regret upgrading :-) Sent from my Nexus 7 using Tapatalk 2

That might have been me in Tescos as I'm always in there filling up :-) Sent from my Nexus 7 using Tapatalk 2

Hi guys apologies for the late update on my Z but I actually got it sorted in the end by booking it in to a local Nissan garage for cost of £98. It turned out that the idle had been advanced and car was running too rich so they adjusted and allowed the car to go through its learning process which sorted it. It scraped through on 0.2 which is the limit but they did say that the loaned cats were totally knackered. Getting my stainless put back on Tuesday and I will then be selling as I've just put deposit down on a 60 plate 370 GT :-) Thanks for all your advice Gaz Sent from my Nexus 7 using Tapatalk 2

Well spent all day with Jez at HDev replacing my cats with standard and a standard Y piece and it still failed the emissions, no change in reading what so ever!! I reckon the testers O2 sensor may be buggered but he reckoned it could be due to the car not recognising the new Lambda settings when they were fitted so back up to HDev for Jez to test but all seemed fine on his computer. Am totally at a loss now as something weird is going on. It is booked in at Fleet Auto way which is a Nissan approved independent on Thursday to see what they can come up with unless someone can give me directions to a very relaxed MOT tester ;-) Sent from my Nexus 7 using Tapatalk 2

Hopefully getting loaned a standard set tomorrow so it passes the test as I didn't keep mine as the berks were supposed to be MOT friendly. Thanks for the advice I shall update tomorrow if it passes or not, fingers crossed Gaz Sent from my Nexus 7 using Tapatalk 2

Atkin666 I did take it for a good blast for an hour and took it straight to test station and they shoved the pipe straight up her pipe still only got a 0.5 reading. Cheers Gaz Sent from my Nexus 7 using Tapatalk 2

Hi Mark I can scan it in the morning as I'm at the girlfriends at the moment. On Friday the car was cold which is why I was advised to get the exhaust hot, so took it for a good hour run and it went straight in on ramp. Passed all other tests on emissions was just the CO2 which was up at 0.56. Last year on my reading was 0.03. Also I had the 2 rear lambda sensors replaced back in November when engine management light came on. The MOT man reckoned the cats were shot as they smelt funny but I only had them fitted in August so doubt if they are, what do you think? Sent from my Nexus 7 using Tapatalk 2

Hi all Was hoping I could get some helpful advice from the experts on this site. My 350 failed the MOT on Friday due to emissions, CO2 reading was 0.56 apparently it should be no more than 0.30. I took the car for an hour hard drive this lunchtime and took it back to motest in Aldershot (had been advised to get cats up to temp) still failed at 0.50!! Anyone know what could be causing this? I'm running berks free flow cats and a cobra stainless exhaust and a remap. It passed last year with the cobra exhaust and standard cats so only change is the berks and remap. Thanks Gary I Sent from my Nexus 7 using Tapatalk 2

Think I've seen a gunmetal like mine a few streets down from me in north town. What color is your Z? Will keep a look out next time I'm in Farnborough Cheers Gaz Sent from my Nexus 7 using Tapatalk 2

Thanks everyone, i will upload some photos once i work out how

Hi all, thought I'd introduce myself to the forum My names Gary and i live in the Aldershot area, I have a 2004 Gunmetal 350z GT and love it :-) The car is pretty stock apart from below Uprev map Plenum spacer EBC discs and pads Stainless Cobra exhaust Berk high flow stainless cats Looking for a nice set of staggered alloys if anyone can suggest any? Cheers Gary Sent from my Nexus 7 using Tapatalk 2

Nice :-) I've been looking for a set of 19's for a while but not sure on style Anyway I shall make sure I look out for your Z next time I'm in the Mortimer reading area Sent from my Nexus 7 using Tapatalk 2

Cool, I shall go and introduce myself :-) By the way the exhaust is a cobra with the addition of Horsham developments free flow stainless cats Sent from my Nexus 7 using Tapatalk 2

Cheers mate, are you in the the local area? Which company in Thatcham, pretty small place Sent from my Nexus 7 using Tapatalk 2

Cheers I'm based in Aldershot Are you local to Mortimer? Have you for any mods on your Z Sent from my Nexus 7 using Tapatalk 2