ZMANALEX
-
Posts
14,760 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by ZMANALEX
-
Hung, Stone in tyre tread Back plate touching rotor Brake pad issue + (check inner pad for wear) Play in rear hub bearing Alex
-
If Girnet can not sort you out I have both brand new and preowned. Alex.
-
How to - fit DBA discs / rotors (YouTube vid)
ZMANALEX replied to Adrian@TORQEN's topic in 350Z Guides
Great videos Adrian And of course DBA rotors in stock and good to go same/next day viewtopic.php?f=157&t=58518 Alex -
What is more important is the direction of the heat dispersal fins if they are angled. They should be facing upwards and to the rear Alex
-
As per my previous message I have preowned door mirrors in stock and good to go same/next day PM on its way Simon Alex
-
I run with the ATS Carbonetic twin plate on my TT 350 Roadster I also supplied and fitted an OS Giken twin plate to a 650bhp TT 350 yesterday and that is also a decent bit of kit Alex
-
Unfortunately the bracket is not available on its own from Nissan as it is part of the mirror assembly. Preowned Door Mirrors in stock and good to go same next day What colour do you require? Drop me a PM if I can help you further Alex
-
PM on its way Paul Alex
-
Okay, in answer to your question. Fit rotors and pads first and then change the fluid and bleed Alex
-
PM received and replied to Jon Both new and preowned door hinges in stock. The top hinge is different from the lower hinge so therefore not interchangable. Alex
-
The brakes should only require bleeding of you break into the system or you change the fluid. A simple rotor and pad swop out should not require bleeding. Alex
-
Best advise that I can give you is to let an engine builder who is conversant with the VQ35DE to inspect and measure up. Remember and pull all the valves and cut the seats and reface the valves as required Then you will have to shim up accordingly. You will also require new crank bearings etc Alex
-
Just PM me with what you require, or better still to avoid tennis ball messages ask your engine builder to give me a list of your requirements and I will price up for you. However it is not a good plan to fit your preowned worn pistons to a different preowned block. Why do you want to swop out the block? Alex
-
In stock and good to go same/next day Choice of 5 x VQ35DE and 2 x HR 350Z and 1 x 370Z:thumbs: Alex
-
If you want an informed answer then that is a question for your engine shop once they have inspected and measured up, however drawing on my experiences, new pistons would be the way to go as they are not much more expensive than a set of rings. Cosworth, Wossner and Arias pistons all in stock and good to go same/next day. Alex.
-
Easy to change Mike OEM bushes in stock and good to go same/next day Drop me a PM if I can help you further Alex
-
Hi and to the forum Rob Alex.
-
PM received and replied to Alex
-
Top of clutch pedal under dash
-
If the creak is from the top of the pedal area then just lubricate the fulcrum area where the spring is located. If it is from the clutch fork area, then just pull back the boot on the side of the gearbox and lubricate accordingly. Alex.
-
PM received and replied to Alex
-
Preowned door cards in stock and good to go same/next day Drop me a PM if I can help you further. Alex
-
Why don't you download a copy of the Nissan workshop manual as all the answers are in there. I hope that you have someone competent who is going to rebuild this motor for you Alex
-
Nothing will make you faster than these for£ 750
ZMANALEX replied to Dave172's topic in 350Z General
I run MPSS XL on the R35 and can not fault them Also great value for money compared to the Dunlop and RE070 runflats. Alex