ZMANALEX

Did they take the wheels off and check the inside pad? Did they check that the back plate does not require a slight repositioning? Are the pads loose within the caliper and moving slightly. Does the noise go away when you slightly touch the brake pedal? Alex

Back plate touching brake rotor: Brake pads worn: Pads in stock if required. Alex.

Looking great Chris Alex.

Nice one mate, thank you: Plenty new genuine Nissan gaskets in stock. Alex.

Best to talk with your proposed tuners to get informed information. Alex

Considering that this is a stag and If this is your first time on the ring then fly over and rent unless you have a fortnight to spare and loadsa wonga. Next time take time out and plan well and enjoy. A quick search will reveal loads of guidance on this trip. Alex.

Buy a code reader, cheap ones are on eBay. Alex.

Slim Jims will get you in within 2 minutes:

It will not be the chain. What code are you getting? What do you mean by the ESP button does not work? Regards, Alex.

PM received and replied to Matt. Genuine Nissan 370 clutch kits in stock and almost half the price of what Nissan have quoted you. Alex.

This is what I would recommend: http://www.350z-uk.com/topic/63721-exedy-clutch-kits-27500-ultra-light-flys-34500/ In stock and good to go same/next day: Just drop me a PM if I can help you further. Alex.

Thanks for the referrals guys: Relays, Fuse Boxes, ECUs, BCMs and IPDM units in stock and good to go same/next day. Just drop me a PM if I can help you further and you will save a fortune. Alex.

PM received and replied to. Plenty complete dash units in stock. Thank you Graham. Alex.

It is a matter of personal taste, however once lowered best to dial back to within the factory tollerences which would be a good starting point and then tweek it from there. Alex.

The best advice that I can give you is to take the car to an indy 350z specialist. Following the correct diagnostic procedures they should have you up and running in no time. There is nothing really complicated with these cars, it is uninformed people that cause the complications. Alex.

Thank you for the referral Doogyrev: PM received Ian, and reply will be with you shortly. All parts are in stock which may be required to fix this issue and all good to go same/next day. Alex.

Thank you for the referral Gudzy: Here is the link to my 10 page sub forum: http://www.350z-uk.com/forum/137-zmanalex/page__prune_day__100__sort_by__Z-A__sort_key__last_post__topicfilter__all Here is the link to the O2 simulators: In stock and good to go same/next day: http://www.350z-uk.com/topic/23011-o2-simulatorslamda-spacers-to-fix-cel-dash-light/ Just drop me a PM if I can help you further: Alex

First thing to do is pull the codes and post them up here or PM me the codes and you will soon be sorted. Alex.

In stock and good to go same/next day. Alex.

The front oblong number plate mount on a UK 350 should be fixed by 2 x bolts/screws and not bonded. Alex.

Probably the flywheel Trevor. Dual mass and single mass flys in stock. Also best to swop out the clutch when the box is out. All in stock and good to go same/next day. However, best to get this diagnosed professionally before you splash the cash. Drop me a PM if I can help you further. Alex.

As been said best to swop out the gearbox oil for some fresh genuine Nissan stuff and add the DC Molyslip as well. Either do this yourself or take the correct products along to the garage for them to carry out the work for you. I carry in stock the correct fluids and the DC Moly so just drop me a PM if I can help you further. If the problem still persists after the fluid change, and you do in fact have a gearbox fault then it will be time to look into a warranty claim. Alex.

Thank you for the referral Sam Mcgoo. Dashurik: JDM and UK cloth and leather seats in stock and good to go same/next day. Just drop me a pm if I can help you further mate: Alex.

Thank you Graham: Brand new genuine Nissan bulge bonnets (face lift) in stock. Just drop me a pm if I can help you further mate: Alex.

More than likely it may well be the compression rod ball joint or bushing. However best to get it checked out and diagnosed properly. All parts are in stock and good to go same/next day. Alex.