Ian

Updated parts list. Shell has now gone so limited parts left that are not listed

I've been trying to work out a way of stretching my car allowance to get one for work

Sounds like how mine did with full Tomei setup. Was embarrassingly loud

I didn’t think it was possible to make a 370 any uglier than standard but well done Nissan that’s hideous

I’ve got a Makita one and it’s useless on anything other than lightly tightened bolts

Ings http://www.superiorracing.com/Exterior-Ings_1_Type_E_Long_Nose_Body_Kit_-_350Z.html

OP updated with parts available. If anyone is interested in the shell, i am open to any offer as long as you come take it away

Seeing as my garage is finally finished and usable, its time to crack on and get this started Got the top part of the engine stripped down, air con rad removed along with the ARB, ready to come straight out the front Rear passenger side cylinder is leaking, badly. Pretty sure the HG is toast. On the plus side, there was no chunks of metal when i drained the oil! Stripped off the valve covers to retrieve coolant pipe and remove turbo pipes Noticed that one of the O2 sensor wires were broken And shes out Now down to the engine. Not done a compression test and not checked the plugs yet but seeing the leakage from the head, i'm certain at the very least the head is knackered. So, what do i do next? Send engine off to Abbey, have a full strip down and rebuild and check everything is OK with it, possibly chuck a set of cams in it while its open cut my losses with this engine and sell it, fit the turbo kit to my good working engine that's currently in my car I'm leaning more towards option 2 and just running it at 400 hp instead of 500 hp

From memory, Im pretty sure its on the passenger side under the heater matrix. If Alex is unable to help with the part, I have one

BUMP more parts added & sold

If Alex is unable to help you with it, I have one left

Updated with more sold parts, still lots more available - if you dont see what you want, ask - i probably have it Also, if anyone wants the shell for free - they are welcome to it. You just need to collect it from South Wales W/C 12th August.

good progress

I’ve always wondered if the R35 manifolds would fit. Never found a set cheap enough to try it though

Agree with the 200sx. Also an rx-7 that fits the larger gentleman would be be nice to have a proper skyline instead of the humongous GTR

Bonnet Passenger Side window motor (Clip Broken) ESP Yaw Rate module Rear Speaker Cover Passenger side window Passenger door weather strip Drivers Door Handle Interior Carpet ECU