cmck13

He has these, http://www.tarmacspo...k/350ZDNI_.aspx Not sure he has the carbon ones you see on ebay though.

I went through 4 different suppliers and varieties over the past few years that all split even though they were advertised as large. I tried these guys in Nottingham a few months ago and at last I am very happy with mine for the driver side, if you are after one that fits neat and tight to the shape of your seat you will not find one any where. These are perfect for every day driving to protect your original seat and being a poser I remove mine for meetings showing the car off etc etc. http://www.premierproductsltd.co.uk/

Hi, as said above very soft paint, had my old Das 6 for over 4 years now, works as well as anything I've seen. The hardest bit is to get mops and pads with a compound you like, every one has their own preference. Detailing world have this guide still in use today if your new to the game well worth the read. One simple tip is to place a black mark on the top of your backing plate to see the pads movement. you'll see what I mean. http://www.detailing...rypolishing.pdf

This is a fairly common problem I am aware that some have cut the top cup of then attacked the ball |I think there are some videos on you tube out there personally I took mine down to a garage I could trust and they did it no easy answer though.

Sound advice.

Same here exactly the same time.

Thought this might give an insight as to what they look like fitted.

And I am fitting it this morning.

Heres a good guide a bit out of date now but the techniques are still the same. Its PDF to open. http://www.detailing...dapolishing.pdf

Here's your answer, as it says use VHB tape. Still stuck and hasn't moved for me. Just take your time getting them aligned correctly before the final push on. Very simple.

Fitted mine in February very pleased with them, no problems with movement and cleaning is simple. Once waxed its a simple light dusting, (photos previous page) not many Z's out there with this extra, well worth it.

Spot on Myheadlight washer was removed to fit a Vortech S/C no problems with the Mot last week.

I''l give you my car when they pry my cold dead hands of the steering wheel, (courtesy of the American gun lobby). Oh and I'm definitely a lot older than you.

Hi guys, did mine last weekend with my boy and found with the previous very welcomed info from Chris it was fairly easy. It was a nice clear view when the inner wheel liner was removed so the drain pipe and dipstick were exposed and with a little negotiation with the dipstick i.e. if you don't struggle and fight too much I wont break and bend you too much it came out with a little wiggle and witchcraft.The only difference I did was to use a small funnel that allowed me to pour the full amount in one go from the bottle into the dipstick opening that took a few minutes to fill up. No problems at all, like most jobs like my boy said the next time probably 30 mins with us both working together. Cheers Chris

Just spoke to my garage who have fitted the extreme clutch and light weight flywheel today and he is very impressed with this set up, however mine is for the 350z. Picking it up tomorrow for its first run but from previous conversations on here they are very favourable with this Australian kit. My mechanic, a Nissan trained man was very pleasantly surprised with this set up and the ease that it was to fit it.

The way to do it is described by GIXXERUK above. I always carry a microfibre cloth in the boot with a bottle of detailing spray if I leave the car for only a short time, If its dry you need to soak the crap later, sometimes I put warm wet kitchen paper on it it to soften it before washing it off. All sounds a bit surreal really but you can see the top lacquer being degraded in a day or two if you do not take action.

Most people on here use paints4u.com as commented above, specialists in paints, works for me, excellent service.

Well done boys, sound like the new Morecambe and Wise duo.

This thread has meandered more than a snake has hips

Hi Chris, I new I would give in put me down for a 350z one, cheers mate.

Congratulations Niki

A warm

Well just to throw another into the pot I've had yellow stuff on for the last 5 years good for normal and occasional track days never had one problem.

A warm

Thanks for the answers all taken on board, I think it will be the tunnel, spoke to a booking clerk and they say to mention to the locating marshal that you require the lower deck. They also quoted they don't want you to get stuck because that will b*gg*r up everyone behind you, enough said.