yokomo Posted December 16, 2009 Posted December 16, 2009 i thought Adam had a tb spacer that was tapped for gausge etc ?? could be wrong though. Quote
nurrish Posted December 16, 2009 Author Posted December 16, 2009 I have had a look on his site but failed to yield any results...i actually have a spacer here with me.....it might be easier/less risky to tap that first Quote
P15UL T Posted December 16, 2009 Posted December 16, 2009 http://www.z1auto.com/prodmore.asp?mode ... rodid=2414 Quote
nurrish Posted December 16, 2009 Author Posted December 16, 2009 http://www.z1auto.com/prodmore.asp?model=350z&cat=engine&prodid=2414 Ahhhh i was looking for a plenum spacer with ports...this will do the job nicely Quote
P15UL T Posted December 16, 2009 Posted December 16, 2009 give u a shout if your ordering as i will need one too and we could maybe get a deal from adam Quote
nurrish Posted December 16, 2009 Author Posted December 16, 2009 give u a shout if your ordering as i will need one too and we could maybe get a deal from adam Good idea Shall let you know Quote
ZMANALEX Posted December 16, 2009 Posted December 16, 2009 Dave, I have black aluminium bumper mesh arriving in the next few days if you are not sorted. The throttle body spacer from Adam works well mate so no worries there. Quote
BulletMagnet Posted December 16, 2009 Posted December 16, 2009 Mmmmmmm three nipples Scaramanga Plenum Spacer FTW!!!!!! Quote
IanS16 Posted December 17, 2009 Posted December 17, 2009 Still, Coming along nicely Dave I break up on Friday so if you need any help next week lemme know Quote
CaptainSensible Posted December 17, 2009 Posted December 17, 2009 Mmmmmmm three nipples Scaramanga Plenum Spacer FTW!!!!!! Quote
nurrish Posted December 19, 2009 Author Posted December 19, 2009 Been a slow day.....down with the sickness and my garage is too fricken cold.... Have successfully modded my gauges into my stock gauge pod. Using a boost gauge and the AEM uego Wideband AFR gauge and i have managed to retain my stock computer with some hackery Quote
yokomo Posted December 19, 2009 Posted December 19, 2009 looks lieka snug fit , what e you doing wiht the stock oil pressure (volts well pfft) ?? also suggest heating the garage Quote
nurrish Posted December 19, 2009 Author Posted December 19, 2009 Will probably set something later on for them...if i can be arsed. Yeah i got a heater in there but i got hot and cold fever so its no good Quote
GT4 Zed Posted December 19, 2009 Posted December 19, 2009 Nicely done with the gauges Dave I will fit the utec for you as i have done it before only 20mins job but it need some adjustments(bending and twisting of the oem bracket to make it fit Quote
yokomo Posted December 19, 2009 Posted December 19, 2009 oh not well of christmas aint fun hope it clears up , till then i guess you can do all the little fidly out of car bits that need doing but dont appear to be progress. Quote
nurrish Posted December 20, 2009 Author Posted December 20, 2009 Felt alot better today so i decided to get some more jobs out the way. I mounted my Utec ecu, fitted my centre console and fitted the main belt for the s/c..Also rerouted some piping. It doesn't seem alot but these little jobs take along time when your on your own Quote
Wookiee22 Posted December 20, 2009 Posted December 20, 2009 Looking good mate. My kit should be arriving soon. Will be picking your brains no doubt! Quote
nurrish Posted December 20, 2009 Author Posted December 20, 2009 Looking good mate. My kit should be arriving soon. Will be picking your brains no doubt! Well i dont envy you Just waiting on the fuel rails to come on tuesday and i can then get the top of the engine back on Just turning that key for the first time is going to be nerve racking!! My dad says i have to push the car out of the garage and as far away from the house as possible Quote
Husky Posted December 20, 2009 Posted December 20, 2009 My dad says i have to push the car out of the garage and as far away from the house as possible Quote
Chris`I Posted December 20, 2009 Posted December 20, 2009 My dad says i have to push the car out of the garage and as far away from the house as possible There speaks a voice of experience Sure it will go fine chap, just tripple check everything as you go and it'll be fine Quote
BulletMagnet Posted December 21, 2009 Posted December 21, 2009 Perhaps a silly question, but why didn't you contemplate using a double gauge pod for the A-pillar? Quote
nurrish Posted December 21, 2009 Author Posted December 21, 2009 Perhaps a silly question, but why didn't you contemplate using a double gauge pod for the A-pillar? Not a fan of the a pillar gauges.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.