SteveW
-
Posts
1,537 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by SteveW
-
On Hudderfield road in West Yorkshire just outside of West Bretton at 12:35 today 10th Match.
-
My bodykit cost just short of £900 to fit and paint its not a Nismo though. But I got quotes ranging between 600 and 3000!!!!
-
Whatever you set the value at the light starts flashing 500 rpm before the set point. When it hits the set point it stays lit all the time.
-
Thank you , much appreciated. I'll check it out today.
-
Just wondering what is the best/easiest way to run a cable from the engine bay into the cabin? Is there a hole already in the bulk head that can be used? If so where should I go looking? I'm planning on using the cables as the loom for an oil temp gauge. Thank you Steve
-
Depends what you want to spend one other option would be to get an OE sump from a scrappy and baffle it yourself or get a local fabricators to baffle it for you? Just some plate drilling, cutting and a spot of welding. Just a thought.
-
Lol love it, sadly wrong time for me too as really want some Apex 100's.
-
I was wondering this also mine is hideous....it's not been cleaned ever and it's now 9 years old!!!
-
My bad misunderstood acc for AC! Do'h. Either way I don't have the other problem either.
-
I don't have this problem and my ACC is on all the time.
-
Another from a hard day on the drive. Just need some new rims and a better exhaust and it'll more or less be finished...
-
Looking awesome mate
-
sorry guys........yet more advice needed on my exhaust !
SteveW replied to JEMAN's topic in 350Z General
Or find a friendly mot tester and fit decats -
Looking good 8)
-
Looking good 8)
-
Does anyone know if Rota MXR are available in 19"? I've looked all over the net but can only seem to find 18's. I'm either after some of these or something similar. Ideally I'd love the forged BBK version but at £4500 they are unachievable! I've also looked at Varrstoen Apex 100's (ES1.1.2) are there any other options that are similar? Cheers Steve
-
Class
-
Bunged Japspeed K1 with Japspeed Y Pipe is 94Db at about 5K rpm Bungs removed the Japspeed K1 and Japapeed Y Pipe is 104Db I'd be interested to know what the ARK system is at 4500-5000rpm if anyone knows???
-
Amuse for the 370 everytime
-
Yes I did. They have built in resistors to protect them.
-
^^ +1 they are gash Totally agree
-
My only suggestion for this is that on step 19 I cut about a 2 inch section out of the snap on loom cover and then crimped in to the purple wire. I found it a bit easier to get all the wires back in that way.
-
Module fitted this morning and working perfectly. Thank you for making these and doing the research flyboy!
