ZMANALEX
-
Posts
14,823 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by ZMANALEX
-
The best way to remove the nuts from the studs on the rear of the Y section is to heat them up and even then they may be so badly corroded that they will snap whatever. Drilling them out is not a big issue and like I said I have all the necessary gaskets and hardware. Either way you are going to have to get the car up in the air.
-
The centre section bolts onto the rear of the Y section and not the manifolds. Just a question of replacing the bolts and nuts and gaskets as required. All in stock so no drama Alex.
-
Saw this the other day and I would be more concerned about damage to the front chassis leg than the paint match. I have a car here at the moment with less panel damage but has been deemed a right off due to front chassis damage. So I guess it is yet another breaker.
-
Assuming that they are 18" then yes they will go on, so that is the answer to your question. However the rears at 255 are a tad wider but should cause no issues and the profiles of 40 and 35 although not ideal will cause no real drama, but still best to stick to 45 or 40 profiles.
-
Got about 20 Shaun but no Pearl. PM sent mate.
-
Hi Matt and welcome to the forum
-
Buy the best, forget the rest. Genuine Nissan everytime for quality and perfect fit. I think that I have one New Coupe Cover left and one for a Roadster. Alex.
-
There are two sizes and I should have both in stock What size do you require? Alex.
-
Looking real good Ryan, well worth the wait. Alex.
-
Yes Stephen, they will.
-
Hi and welcome to the forum. As Zugara has said I have all the parts required to fix your brake woes. You have pm mate. Alex.
-
Hi Martyn and welcome to the forum.
-
Ferodo DS 2500s are the choice of the people who know a thing or two about brakes viewtopic.php?f=38&t=27438 Alex.
-
I would think so Mike but I will let Chris confirm once he has considered the options.
-
You have PM
-
Clicky axle kits in stock and good to ship same/next day. Drop me a pm if I can help you further, Alex.
-
Is that a typo Mike?
-
Here you go: Grade 304 - 25mm od x 1.5g x 1M is £4.92 + vat. Grade 316 - 25mm od x 1.5g x 1M is £6.96 + vat. For 90 feet you will require 5 x 6M lengths. Alex.
-
You will find them here In stock and good to go same/next day viewtopic.php?f=38&t=13464
-
To expensive to ship 6 metre lengths, so what is the shortest suitable length for you.?
-
Use the Nissan stuff Graham. SAE 75W-85 API GL4+ Not suitable for auto transmissions. Alex.
-
What gauge do you require and in what lengths?
-
Martin is heading over for a few pax laps.
-
Rooste: You have pm.
-
PO340 relates to Camshaft Position Sensor Circuit Malfunction. Probably just a glitch due to the battery issue. Charge up your battery and carry out an ECU reset and hopefully all will be good. Alex.