ZMANALEX

I've got one in GM. £100.00 +shipping. Sorry No Swaps.

You would have to remove the rotors to inspect for foreign bodies so carry out the rebedding procedure first, to burn off any pad deposits that you have put there with sitting with your foot on the brake when pads are hot.

Sounds like you have pad deposit on your rotor Craig. These pad footprints could well be the cause of your issues. Give them another good bed in on a quiet open road. Failing that there may be a foreign body got in between the hub face and the rear of the rotor at install. It does not take much, a small sliver of rust particle has been known to cause this. Failing that, throw the EBC rotors in the bin and fit Performance Friction.

I have Eibach hubcentric spacers in stock in 20mm and 25mm. If it is quality that you are after then it has got to be Eibach everytime. Good to go same/next day. Alex.

Evening Alex, thanks for the quick reply...I didn't have time to get the wheels off etc today so I just whipped the three screw out the centre console and used a 10mm ratchet spanner to tighten the cable. She feels a lot better but time will tell I guess. Regards Alex Buy yourself a deep 10mm socket for next time and adjust through the ashtray aperture.

I have these available Craig. Drop me a pm if I can help you further. Alex.

If adjusted up properly then it should just sneak past its MOT . As you know Dave the handbrake is characteristically very poor on the Z and does not inspire much confidence.

Best to let off the cable, adjust up the drums and then readjust the cable. A quick tighten up of the cable will not cause any harm but to get the best from your handbrake the drums should be adjusted first. Alex.

32mm

Both motors in stock and good to go same/next day Fitting is easy, I will talk you through it. Drop me a pm if I can help you further. Alex.

The IKH 16 is not suitable for the 350HR or the 370. They are fine for the DE.

I can help you with this Stu. You have PM. Alex.

Denso Iridium Power IKH16 is all that you will need. Good for 54,000 miles. In stock and good to go same/next day: £48.00 for a set of six. Alex.

Only pennies from Nissan. Section 767: 78100HC

Chris, I stock Cosworth, HKS and K&N. Alex.

Dave, If you are bench testing from a 12v battery and the pumps do not spin, then you definately have faulty pumps mate. Alex.

For track use you will have to choose your discs and pads with great care.

sshhhhhh don't tell him Hi Alex, What condition are the wheels in? Not worried about tyres as I'll swap with mine already on the Z. just looking for a non curbed set of ray's. Can you pm or post me some pics. cheers Matt Absolutely mint Matt, with no kerbing and original, but unfortunately I sold them this morning. I also have a brand new set it they are of any interest to you

Looking great Andy Told you that you would love the sound of the Buddy Club Pro Spec 111 Was it a trouble free install?

Matt, I have a spare set of rays at £400.00 and a new JWT pop charger at £ 110.00 Drop me a pm if I can help you further. Alex.

Still a replica Chris.

Maybe you have a big sump or a sump spacer fitted. Otherwise 5 lt should take it to max. mark. Check as Headphones advises.

NO.

You have PM

20mm and 25mm will give you the perfect stance. Eibach 20mm and 25 mm in stock and good to go same/next day Fit the best, forget the rest. You have pm James. Alex.