ZMANALEX

Received, read and replied to.

I am sure that you can fix that.

Run both

I can vouch for this car people. It is in fact better than in the description as I would describe it as in new condition. Extremely well cared for car and a real credit to its owner. Genuine car at a very realistic price. GLWTS.

Both in stock and good to go same/next day Front Hub £225.00 Front Compression Arm £335.00 Alex.

Your link is not working for me, however the skyline exhaust is circa 100 ml longer than the 350Z. Some systems have a 150mm small section which you omit to fit when the application is 350z. If that is not the case in this application then a small cut and weld jobbie will be required. No Drama.

You have pm mate

Here you go. viewtopic.php?f=38&t=32894 Alex.

You are to quick for me mate.

I got brand new ones, Genuine Nissan. Circa £240.00 depending on VIN. Alex

Spiggot rings are available if you have boss size issues. Perhaps if you mentioned what brand of wheel you are considering fitting then further advice could be given.

Not ideal, but they will fit. The 225 will be slightly stretched but no drama. 8.5 all round does not worry me unduly. Alex.

If the "tappet" noise has only developed since the service I would be leaning towards the oil that they put in. However at 100,000 miles then there will be some wear and tear on the engine and if the noise is tappet/cam/bucket wear then this can turn out to be an expensive fix. Upgrading the heads on a NA engine will give you very small beneficial power returns. I do have spare low mileage cyl. heads in stock complete with valves, cams, buckets etc. If I can help further then drop me a pm. Alex.

Yes Chris it is, but quite a sobering effect to see it yet again.

Top up your washer bottles and try again

Tyre Pressures.

I have them

Colin, The "standard" tolerences on your print out are very slightly different from the Nissan numbers on there SDS. The final numbers are all good, you will notice that the camber on the left rear has been reduced by only adjusting the rear left toe. You are also now running at 0.00 thrust angle on the rear which is ideal. Alex.

Colin, The 370 SDS can be found here. viewtopic.php?f=102&t=41648

By popular demand:

Is the book your after z33-u,z33-u2 or z33-u3? It will be the Z33-U as the OP's car is a "56 plate 350z GT"

Paul, I have these in stock. They are brand new and are genuine Nissan and they fit nicely in the Nissan leather wallet. I also have the leather wallets and genuine Nissan unstamped service books. Let me know if I can help you further. Alex.

PM received and replied to Sally. Two in stock Alex.

The door height can be adjusted by repositioning the hinges or in your case a slght adjustment of the striker plate may suffice. The mirror seal is easily replaced and I have them in stock (new) Drop me a pm if I can help you further. Alex.

Anders, if you leave now you will make the hospitality hot breakfast. Vik, Martin is going (Athol's friend)