ZMANALEX

They are the same The odd one out is the GT4

There are only so many colours in the colour spectrum Alex and Vik The shade of purple I am going to go for is not similar to your old z, nor the american zed I posted up. More like the picture biggy did: download/file.php?id=6979&t=1 I probably will change my mind 100 times before the winter anyway Purple is Purple

In stock and good to tomorrow morning. Drop me a pm and don't worry it wont be £100.00 Alex.

Welcome to the forum Nolan and congratulations on your purchase.

Purple has been done before and is yesterdays news, be different, be original.

Suspension components are the same. Have I not already confirmed this to you previously.? Alex. Lol, yes, i have been told this but surely there are some differances like braces? considering the g35 is longer. Also, i always thogh z33 had a single front lower arm but i checked my G last night and it has a twin front lower arm set up. Cheers Paul Like I have already said the suspension set ups are similar.

Suspension components are the same. Have I not already confirmed this to you previously.? Alex.

Mine`s 6 years old with 25k. But would you accept £8700 for it delivered? your making me nervous!!!.........just remember when I need cheap parts who's got your back on the other thread Alex I might call him back and pay more.........that'd make it alllllll better I am sure that all will be fine mate, it is just that it sounds like a cracker of a deal at that mileage. I am never that lucky, I can't even sell an engine without getting grief

The main issue that I was really getting at is that they are not heated. There are enough wires to operate the up/down and side to side glass adjustment but there will not be a folding facility.

Mine`s 6 years old with 25k. But would you accept £8700 for it delivered?

Rico, Your goods have been shipped exactly as promised and agreed. As you are well aware a bank draft or cashiers cheque is not the same as cash and the banks in the UK still require 7 working days to clear the funds. I am sorry, but I thought that I had fully explained to you, that I could not ship your goods until your cheque had cleared. However your cheque cleared yesterday (Monday) and your goods are now on there way to Advanced Motorsport and Engineering at Silverstone. I spoke with them on Friday and again yesterday and they are aware that the goods have been shipped and they have now programmed your car into there workshop load planner for this week. You have my phone numbers Rico, don't you think that a quick call to me would have been a bit more appropriate. Alex.

Good luck with Nissan Customer Services. If push does come to shove and you find that Nissan are not cooperative, then help is on hand as I have plenty low mileage preowned cyl. heads, camshafts and valves available. In stock and good to go same/next day. If you have no joy with Nissan then drop me a pm if you would like me to help you further. Alex.

I saw the pictures in the original post and the first thing that got the alarm bells going for me was the 29K on a 7 year old car. However good luck with your purchase and I hope all is well with the car. Perhaps an independent engineers report on the car may be a good idea even at this late stage. The AA provide a comprehensive service for such checks and a full HPI check would also certainly be advised.

You will require more wires to successfully wire these up to a UK car to retain all your functions. Pull your door card off and have a look.

You have PM.

My old car in purple.

And I have in stock the OEM shift knob in Black or Alezan, but only got one of each left in stock. These are genuine Nissan. Alex.

£35.45 each. I think that I have one pair left in stock. Drop me a pm if I can help you further. Alex

LUK manufacture the stock dual mass flys for Nissan. At circa 30K you were probably due for a fly and clutch swopout. Pity you never posted up before you went to Nissan as prices on here are very reasonable. viewtopic.php?f=38&t=27436 viewtopic.php?f=38&t=31543 Alex.

Steve, You do not require to carry out most of the stuff that you have listed above. Providing you have the tools to access the 4 bolts securing the hub then very little stripping is required. I have never had to use a puller although the inner part of the bearing may be very tight on the sleeve.

I have ballasts and replacement lights Drop me a pm if I can help you further. Alex.

Yes sorry mate, I realised it was the hub and the bearing after I wrote the response. It doesn't make sense why Nissan would quote for a new carrier as well??? I could understand a new axle because sometimes the axle is too worn. Really considering having a go myself. Just need a hub puller to get the axle off and a ball joint separator to get the hub carrier off. We've got some presses at work I can use just a question of having the right drift to put the new bearing on. Cheers Steve The bearing/hub runs on the hub carrier or sometimes referred to as a sleeve. There is no axle as such on the 350Z. This should be the only issue that you have as the inner part of the bearing is a tight fit on the "sleeve" and you will not know if this is worn/damaged untill you get the bearing off. Bearings/hubs in stock and good to go same/next day. Alex.

Steve, The bearing does not come on its own mate, what you get is in the picture which is a bearing and hub. I know that Nissan when replacing the rear bearing/hub, usually also quote for a hub carrier as well which is around £250.00 approx. Alex.

Here you go Steve. viewtopic.php?f=32&t=28625

Not many track events left now as getting close to the end of yet another season. Should be some good times tomorrow night as the Touring cars and supporting races at the weekend put down a lot of rubber so should be nice and sticky. September 7th September (Tuesday), Knockhill, 5-7, Hot Marques http://www.knockhill.com/trackdays/index.php 18th September (Saturday) Knockhill, 9-1, SIDC http://www.sidc.co.uk/shop/product_info ... cts_id=219 24th September (Friday) Knockhill, 5:30-7:30, GMSC, http://www.gmsc.org.uk/event.cfm?ID=59 30th September (Thursday) Knockhill: 9am - 5pm: Livingston Autoparts: Contact Alex for subsidized rate: October November 13th Nov (Saturday), Knockhill, 12-4, TrackScotland http://trackscotland.co.uk