ZMANALEX

PMs received and replied to

The braided brake lines are not interchangable between Brembo and non Brembo. I have both types in stock Drop me a pm if I can help you further. Clutch line is easy to swop out however bleeding can be a PITA. Alex.

Keep in mind that Bi-Xenons are 8 pin and your JDM will probably be 6 pin.

Hi and welcome to the forum

I will measure them up for you tomorrow for you mate What brand of Dual CAI are you running? Alex.

Hi and welcome to the forum I have all the required parts in stock including the belts. PM on its way. Alex

Not sure what the Japs recommend for your diff Jason, however you wont go far wrong with 75w90

Hi and to the forum

In stock and good to go same/next day Drop me a pm if I can help you further Alex

Great night had by all at Knockhill last night and no red flags. Conditions were perfect and the sun was shining all night. Thanks to all for coming and nice to meet George at last Alex.

Hi and to the forum

I have already told you this

Hi and welcome to the forum

PM sent Viper Alex

to the forum

As the guys have said probably drop links. Disconnect the rear links and tie them up out the way and take the car for a gentle spin round the block. If the noise is gone then it would be safe to say that the noise is from the drop links. I keep the upgraded Niisan links in stock as well as the PowerGrid adjustable ones. Drop me a pm if I can help you further Chris Alex.

Standard Brembo discs and pads in stock. Also got, DBA, Performance Friction and Stoptech. Various pad brands and compounds in stock. Drop me a pm if I can help you further. Alex.

Hi and to the forum

Here you go viewtopic.php?f=157&t=43466

Teins wont give you a drop of 25 - 30mm. However these will and I have them in stock good to go viewtopic.php?f=157&t=42416 Regards, Alex.

Guess what Anders Preowned in stock and possibly new ones as well. Alex.

Only seen this once before and the way I traced it was by disconnecting the VVT solenoid. Well done Nissan in tracing this issue Alex.

Well done guys

viewtopic.php?f=157&t=46541 viewtopic.php?f=157&t=50717

Anders, I do not think that any one is recommending a heavy upgrade. I would assume that the OPs Zed originally had OEM Brembos fitted to it and fitting EBC IMHO is ten steps backwards. The natural replacement for Brembo rotors and a step up is DBA which are also cheaper than the OEM Brembos. However EBC will be fine if fitted correcly and is only being driven to the shops and back by your Granny. Love your disclaimer by the way Alex.