ZMANALEX

Enjoy your weekend Steven I am sure that you will have loadsa fun on both circuits.

Hi and welcome to the forum

PM received and replied to: HR engines in stock and good to go same/next day In reply to your original question HR to DE. This is doable but will devalue the car: Parts required. Complete DE engine with all ancillaries. DE Fly and clutch kit DE Gearbox DE slave cyl DE Cats DE ECU DE complete engine harness Probably more but it is getting late and I have had a hard day. Also some rewiring to be done and a tune. Alex

Hi and welcome to the forum.

Here you go and only £80.00 per pair viewtopic.php?f=157&t=43456 Easy fit and very cost effective fix Alex.

That will depend how close the turbo pipes are to the starter motor. The pipes may restrict the removal of the starter motor. You will have to get underneath and have a look. I can now remove and refit my starter motor on my Zed well within 1 hour and I have a TT set up. Alex.

1 hr is plenty to swop out a starter motor on a N/A 350 Zed

Hi and welcome to the forum Dave

Yip I know Mark I have a selection of switches here off 350Z and G35. However the loom off the Cruise switch goes into the same connector as the Phone/Audio switch loom that connects to the Angle sensor. In other words the wires from both switches amalgamate before hooking up with the Angle sensor. I can see no difference between the 350Z and G35 switches and the connector appears to be the same. The only difference that is obvious to me is that the wiper and light combination switches are on different sides. Perhaps you can advise what the differences are.

Just your driving aids kicking in Just reread your original post so maybe not.

I really hope I get to meet you one day kid. "a brilliant man finds a way not to fight a war"

Hi and welcome to the forum

Clever lad

This thread is not about fitting cruise to a JDM. Alex.

Hi and welcome to the forum

It's a no brainer, Click that pay button now

At that price you can not go wrong, all you have to do now is find some similar Dunlop fronts. Remember and check the sell by dates

Afraid not matey. Save up and buy a genuine one

See your other thread.

No longer stock these guys as they are a rubbish fit and usually require expensive work to get a proper fit. Perhaps the newer versions are a bit better as it is 18 months since I last sold these. Alex.

Can't supply pin and bolt on it's own as it is part of the caliper as stated in original post. If I rob the caliper of the pin and bolt then the caliper is rendered useless. To help you out, you can have a complete front pair of front JDM callipers for £50.00 if that helps. If shipped tomorrow morning special delivery then they should be with you Monday. Shipping by Royal Mail special delivery will not be cheap, however it will of course be at cost price. Alex.

The large OEM lug nuts will fit however you will scratch the inside of the lug nut aperture of the LMGT4 wheel when you squeeze the socket in. I have a set of small fitting chrome lug nuts that will be compatible with the LMGT4. I also have 12 of the small fitting Genuine LMGT4 lug nuts in black, these are brand new. I have a few new LMGT4 wheels im stock so I will have a rummage in the boxes and see if there are any black lug nuts rattling about. You will also require a different size socket to fit the small lug nuts, also in stock. Let me know if I can help you further. Alex.

Is yours not a JDM caliper then????? Post office closes in 15 minutes so unfortunately not much that I can do for you today.

In stock however it is part of the Nissan JDM caliper. Alex

Mark, Where are you planning to mount these switches? Alex.