ZMANALEX

They tried this a few years back and it never caught on as most, including myself found that the cambers were all "wrong" and there was insufficient run off areas where it mattered which did not inspire confidence, however thay have now addressed the run off issues with some major work having taken place during the close season. Cambers remain the same. The KRC reverse circuit is extremely demanding and expect your lap times to be down by circa 6 secs. Alex

When the oil light comes on it is to late I am afraid. Alex

OEM airbox with Cosworth or HKS Performnace panel filters Alex

HKS and Cosworth in stock and good to go same/next day:#1: Check out my sub forum viewforum.php?f=157 Alex

Coincidence, nothing to do with exhaust. As Dan has said get some proper oil in it NOW. Alex

Nismo style N1 rear wings in stock Good quality and great fit Alex

Rear LED lights available here viewtopic.php?f=157&t=13464

Chris, I would wrap all exhaust stuff that is close to the clutch lines and tube. I would also wrap the clutch lines and hose. I would also recommend that you swop out the concentric tube as well as the concentric slave. viewtopic.php?f=157&t=57096 viewtopic.php?f=157&t=57094 Both these parts are in stock and good to go same/next day mate Alex

It is T3 that you have Sam You can purchase a decent hand held laser temperature tool for circa £50.00

Pm received and replied to Amy: Thanks for the referrals guys

I monitor mine on the Z but not the 35. Alex

If it is a coupe that you have then the most economical way is to simply fit a bolt on horizontal harness bar. If you have a Roadster then not so economical or easy. Alex

Hi and to the forum Glenn PM received and replied to Alex

Amy, I stock Genuine Nissan Auto Transmision fluid. Nissan say that it is an oil for life and does not require changing, however I have done quite a few Auto. Tranmission fluid changes recently and have supplied quite a few forum members with the same oil. Alex.

5W30 fully synth is what Nissan recommend for the VQ35DE

Genuine Nissan OEM dual mass flywheels in stock and good to go same/next day if required Also single mass aluminium lightened flywheels also in stock and good to go same/next day. Drop me a PM if I can help you further mate Alex

We all did as well mate

Despite what is written above, and drawing on my own experiences and after in depth consultatuion with Denso, I have found that the Denso Iridium 0.4mm plug lasts as long as the 0.7mm plug and have experienced no issues or failures within 54,000 miles on either plug on the hundreds of sets that I have sold or fitted. I would replace any Denso Iridium plug for free that fails within that period without question on any N/A engine. Alex

These are captive parts and correct bolts and washers can not be bought after market so do not waste your time and energy. As you know I have these in stock and good to go same/next day. Good luck with your search elsewhere mate:thumbs: Alex

That is your problem mate: As Sam has said there are 8 bleed nipples in total. Should have went to Spec-Savers. Alex

Should really be done every 54,000 miles and Denso Iridium is the way to go and at £49.95 it is a no brainer. In stock and good to go same/next day. viewtopic.php?f=157&t=44399 Pm received and replied to Mark Alex

Can I ask how many bleed nipples you are bleeding and if are you bleeding using the traditional method ie: 2 men, bottle and hose or are you using specialised brake bleeding equipment.? Also did you allow the brake master cyl. reservoir to run dry? Alex

Pm received and replied to

Dozens in stock, if still required. Alex

If you have a leak then the pedal will go to the floor mate, especially when you start the engine and the servo kicks in. Get some one to press the brake pedal while you search for the leak.