Jump to content

ZMANALEX

Members
  • Posts

    15,107
  • Joined

  • Last visited

Everything posted by ZMANALEX

  1. Thanks foor the heads up Neil Leosille, the 350Z VQ35DE Engine has a maintenance free drive chain. The only belts are these ones, which are on the front of the engine: viewtopic.php?f=157&t=31548 As Neil has mentioned, I carry in stock all the proper service items and lots more. Have a look in here: viewforum.php?f=157 All in stock and good to go same/next day Just drop me a PM if I can help you further or if you have any further questions Alex
  2. I have the Air Con modules in stock PM me over the part number from your old unit and I will run a compatibility check for you. Alex
  3. Compression Rod ball joint or bushes, Sway bar drop links and bushes, Lower hub carrier ball joint are all prone to cause front suspension knocking: Greaze and rotate for the clicky axle issue for a temporary fix or fit new for permanent fix. Clean out your washer lines and the non return valve to help your washer issue or replace the valve and pumps: All the above in stock if required, and good to go same, next day. Alex
  4. In stock and good to go same/next day
  5. Try the resets, they are in the guide's section.
  6. Brembo calipers will clear the 17" OEM Nissan wheels. Alex.
  7. Fuse Link @ + Battery terminal You are engaging the clutch, yeah!
  8. ZMANALEX

    Squeaky Brakes

    Beat you to it
  9. ZMANALEX

    Squeaky Brakes

    Here you go mate: viewtopic.php?f=157&t=55106 viewtopic.php?f=157&t=55107 viewtopic.php?f=157&t=27438 Any of these will serve you well In stock and good to go same/next day Alex
  10. You will not go to far wrong with this Exactly what you are looking for viewtopic.php?f=56&t=60222&start=0 Alex
  11. In stock and good to go same/next day Alex
  12. Unfortunately I do not think that will happen. A refund is probably all that the OP will get. Good luck
  13. Unfortunately they will not be able to supply a dual mass fly for an HR at the same price as the DE and the clutch kit is more expensive as well and it does not come with a new clutch release bearing. Alex
  14. Preowned CAIs in stock for 350 HR. Nismo and JWT Both will give you a more throaty effect Good to go same/next day Alex
  15. to the forum Antonio
  16. Cosworth Performance Panel Filters are also £29.95. Both Cosworth and HKS PPF are in stock and good to go same/next day Alex
  17. If your car is a VQ35DE then if you replace the clutch slave cyl. and fluid and fit a braided clutch line then that should sort your problem. All parts in stock and good to go same/next day Alex
  18. There is a NTSB on this issue for cars under manufacturers warranty. Step 1: Lub and rotate: Step 2: Replace axle slide with upgraded slide. The slides have code numbers on them so that Nissan technicians know if they have been upgraded at any time Alex
  19. DBA T3 Rotors are the way to go Dave Rear Genuine Brembo aftermarket pads also in stock at £34.95 viewtopic.php?f=157&t=58518 http://vimeo.com/24192150 viewtopic.php?f=157&t=55107 All in stock and good to go same/next day Alex
  20. I have in stock the HKS Performance Panel Filters for your 05 350Z priced at £29.95. Alex
  21. I have done a few, some with engine in and some with engine out. Why are you considering replacing the headers? Alex
  22. All parts in stock
  23. In stock and good to go same/next day. Liner fixings also in stock Alex
  24. They will fit, however you will have to swop over the drop glass Alex
  25. The clutch release bearing only turns when the clutch is depressed
×
×
  • Create New...